SDA41EUF

Solid State Devices, Inc. SDA41AUF thru SDA41GUF 14.5A Rectifier Assembly 14.5 AMPS 50 ─ 600 VOLTS ULTRA FAST RECOVERY SINGLE PHASE BRIDGE RECTIFIER FEATURES: Ultra Fast Reverse Recovery Time 70 ns Max Average Output Current 14.5 Amps @ 50OC PIV 50 to 600 Volts Per Leg Thermal Resistance Junction to Case 1.5OC/W Max All Welded Interconnects Hermetically Sealed Universal 3 Way Terminals Aluminum Case Available in Higher Voltages Hyper Fast and Standard Recovery Versions Available – Contact Factory T X, TXV, and S-Level Screening Available 2/ 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ SDA41 ____ UF ____ │ │ └ Screening 2/ │ │ │ │ │ │ │ └ │ │ │ │ │ └ __ = Not Screened TX = TX Level TXV = TXV S = S Level Reverse Recovery Time UF = Ultra Fast Recovery E = 400V F = 500V G = 600V Voltage/Family A = 50V B = 100V C = 200V D = 300V • • • • • • • • • • • ELECTRICAL CHARACTERISTICS3 Part Number Peak Inverse Voltage (per leg) Sine Wave Reverse4 RMS Recovery Input Time Voltage Max. Average DC Output Current TC=Case Temp Average DC Output Current TA= Ambient Temp (no heat sink) Peak Forward Surge Current (1 Cycle) Peak Repetitive Forward Current Maximum Forward Voltage (per leg) @ 3 ADC Maximum Reverse Current (per leg) @ PIV Symbol Units Conditions SDA41AUF SDA41BUF SDA41CUF SDA41DUF SDA41EUF SDA41FUF SDA41GUF PIV Volts 50 100 200 300 400 500 600 Vr Volts 35 70 140 210 280 350 420 Trr ns Max 70 70 70 70 70 70 70 IF (AV) IF (AV) Amps Amps 50oC 100oC 25oC 55oC 14.5 14.5 14.5 14.5 14.5 14.5 14.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 5 5 5 5 5 5 5 4 4 4 4 4 4 4 IFSM Amps 75 75 75 75 75 75 75 IFRM Amps 25 25 25 25 25 25 25 VF Volts 1.35 1.35 1.35 1.35 1.35 1.35 1.35 IR μA 25oC 100oC 20 20 20 20 20 20 20 500 500 500 500 500 500 500 NOTES: 1. For Ordering Information, Price, Operating Curves, and Availability – Contact Factory. 2. Screening based on MIL-PRF-19500. Screening flows available on request. 3. Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4. Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0058A DOC SDA41AUF thru SDA41GUF Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDA41AUF through SDA41GUF: NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0058A DOC