SDA480APTX

SDA480AD thru SDA480FP Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com HIGH RELIABILITY ULTRA FAST RECOVERY DOUBLER/CENTER TAP RECTIFIER ASSEMBLY FEATURES: Average Output Current 25 Amps @ 55° C PIV 50 to 300 Volts Per Leg High Surge 150 Amps Ultra Fast Reverse Recovery Time 40 ns Max Hermetically Sealed Discretes Thermally Superior Encapsulation Aluminum Case, Electrically Isolated Choice of Spade, Hook, or Turret Terminals Available in Higher Voltages Available in Standard, Fast, and Hyper Fast Recovery Times T X, TXV, or S-Level Screening Available 20 AMP, 50 ─ 300 VOLTS Designer’s Data Sheet Part Number/Ordering Information 1/ SDA480 __ __ __ │ │ └ Screening 2/ __ = Not Screened ││ TX = TX Level ││ TXV = TXV ││ S = S Level ││ N = Common Anode │ └ Configuration P = Common Cathode │ D = Doubler │ │ │ Peak Inverse Voltage (per leg) └ A = 50V, B = 100V, C = 150V, D = 200V, mE = 250V, and F = 300V. • • • • • • • • • • • MAXIMUM RATINGS Peak Repetitive Reverse Voltage (per leg) And DC Blocking Voltage (per leg) RMS Reverse Voltage (per leg) Reverse3/ Recovery Time Half Wave Rectified Forward Current, Averaged Over Full Cycle4/ Peak Repetitive Forward Current5/ Peak Surge Current6/ Operating and Storage Temperature Thermal Resistance Junction to Case Part Number Symbol Units SDA480A(*) SDA480B(*) SDA480C(*) SDA480D(*) SDA480E(*) SDA480F(*) VRM (rep) VR Volts 50 100 150 200 250 300 Vr Volts 35 70 105 140 175 210 Trr ns 40 40 40 40 40 40 IO Amps 20 20 20 20 20 20 IFM (rep) Amps 75 75 75 75 75 75 IFM (surge) Amps 150 150 150 150 150 150 TJ Tstg ° RθJC ° C C/W 6.0 6.0 6.0 6.0 6.0 6.0 - 65 to +150 - 65 to +150 - 65 to +150 - 65 to +150 - 65 to +150 - 65 to +150 * N, P, or D- Terminal Configurations: See Figure 1. 4. Resistive Load, 60Hz, Sine Wave, TC=55OC. 5. TC = 55OC, 8.3 ms Pulse, Allow Junction to Reach Equilibrium Between Pulses. 6. TC = 55OC, Superimposed on Rated Current at Rated Voltage, 8.3 ms Pulse. NOTES: 1. For Ordering Information, Price, and Availability- Contact Factory. 2. Screening per MIL-PRF-19500. 3. Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. SDA 480 with Turret Terminals: SDA 480 with Hook Terminals: SDA 480 with Spade Terminals: NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0037A DOC SDA480AD thru SDA480FP Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com ELECTRICAL CHARACTERISTICS (Per Leg) Part Number Max Full Cycle Forward Voltage Drop, Averaged Over Full Cycle Max Instantaneous Forward Voltage Drop Max Full Cycle Reverse Leakage Current, Averaged Over Full Cycle Max Reverse Leakage Current Max Junction Capacitance Symbol Units Conditions SDA480A(*) SDA480B(*) SDA480C(*) SDA480D(*) SDA480E(*) VF (AV) Vdc VF Vdc IR (AV) μAdc IR μAdc Rated VR , TC = 100° C 200 200 200 200 200 200 CJ pf VR = 10V, TC = 25° C 100 100 100 100 100 100 IO (Max), 60hz Square If = 6 Amps, Rated VR, 60Hz, Square Wave, T C = 25°C Wave, TC = 55°C TC = 25°C , 300us Pulse 0.5 0.95 5 0.5 0.95 5 0.5 0.95 5 0.95 0.95 0.95 See Figure 1. 5 5 5 0.5 0.5 SDA480F(*) 0.5 * N, P, or D- Terminal Configurations: SDA480AD through SDA480FP*: FIGURE 1: *For information on curves, contact the Factory Representative for Engineering Assistance.