SDAD101S10F

SDAD101 F Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Part Number/Ordering Information 1/ SDAD10 1 __ __ __ __ └ Screening 2/ ││ ││ Designer’s Data Sheet 2,500 to 15,000 VOLTS FAST RECOVERY STACKABLE HIGH VOLTAGE RECTIFIER FEATURES:  Stackable to 600 kV+  PIV 2.5 kV to 15 kV  Fast Reverse Recovery Time  Only Hermetically Sealed Rectifiers Used  Controlled Avalanche Rated  Modular Design for Easy Stacking  Storage and Operating Temps -65°C to +150°C  Available in Standard, Ultra Fast and Hyper Fast Versions  TX, TXV, and S-Level Screening Available2/  Replacement Upgrade – Microsemi / Unitrode Types UFB2.5 Through UFS10 __ = Not Screened ││││ TX = TX Level │ │ ││ TXV = TXV Level │ ││ S = S Level ││││ ││ └ Reverse Recovery Time │ ││ F = Fast Recovery Time │ ││ └ Voltage 2.5 = 2.5kV, 5 = 5kV, │ 7.5 = 7.5kV, 10 = 10kV, and │ │ 15 = 15kV └ │ Power Rating (See Below) │ └ Package Size = 1 Inch Diameter ELECTRICAL CHARACTERISTICS3/ Peak Inverse Voltage Reverse Recovery 5/ Time Average DC 4/ Output Current Tc = Case Temperature Surge Nonrepetitive Maximum Forward Voltage Drop Maximum Leakage Current @PIV Replacement Part Number Part Number PIV (KV) Max (ns) 25 C If(avg) 75 C 50 C Ifsm 100 C Vf (V) 25 C If (A) Ir (uA) 25 C 25 C SDAD101 B 2.5 F SDAD101 B 5.0 F SDAD101 S 5.0 F SDAD101 B 7.5 F SDAD101 S 7.5 F SDAD101 S 10 F SDAD101 H 2.5 F SDAD101 H 5.0 F SDAD101 H 7.5 F SDAD101 H 10 F SDAD101 H 15 F 2.5 5.0 5.0 7.5 7.5 10 2.5 5.0 7.5 10 15 500 500 500 500 500 500 500 500 500 500 500 0.90 0.58 0.50 0.45 0.38 0.30 1.80 1.06 0.90 0.76 0.60 2.00 70 1.30 70 0.90 20 1.00 70 0.75 20 0.58 20 High Current Versions 4.00 150 2.60 150 2.00 150 1.50 150 1.06 30 6.0 12.0 12.0 18.0 18.0 23.0 3.6 6.1 9.0 11.8 17.2 0.90 0.60 0.50 0.40 0.40 0.30 1.8 1.1 0.9 0.8 0.5 10 10 5 10 5 5 10 10 10 10 10 UFB-2.5 UFB-5 UFS-5 UFB-7.5 UFS-7.5 UFS-10 ----------- SDAD101 Package: NOTES: For Ordering Information, Price, Curves, and Availability- Contact Factory. Screening based on MIL-PRF-19500.Screening flows available on request. Unless Otherwise Specified, All Electrical Characteristics @25ºC. Tc = 50 ºC typical operation in oil. Tc = 75 ºC is typical ambient Ta = 25 ºC unheatsunk. 5/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. 1/ 2/ 3/ 4/ NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0041B DOC