SDAD103H10F

SDAD103 F Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com 2,500 to 15,000 VOLTS FAST RECOVERY STACKABLE HIGH VOLTAGE RECTIFIER FEATURES: Stackable to 600 kV+ PIV 2.5 kV to 15 kV High Current Ratings Fast Reverse Recovery Time Only Hermetically Sealed Rectifiers Used Controlled Avalanche Rated Modular Design for Easy Stacking Storage and Operating Temps -65°C to +150°C Available in Ultra Fast and Hyper Fast Versions Replacement Upgrade – Microsemi / Unitrode types UGF-2.5 through UGC-15 TX, TXV, and S-Level Screening Available 2/ Part Number/Ordering Information 1/ SDAD10 3 __ __ __ __ 2/ │ │ │ │ └ Screening Designer’s Data Sheet            __ = Not Screened ││ ││ TX = TX Level │ │ ││ TXV = TXV Level │ ││ S = S Level ││ ││ ││ └ Reverse Recovery Time 4/ │ │││ F = Fast Recovery Time ││ └ Voltage 2.5 = 2.5kV, 5 = 5kV, │ 7.5 = 7.5kV, 10 = 10kV, and │ │ 15 = 15kV │└ Power Rating (See Below) │ └ Package Size = 3 Inches Diameter 5/ ELECTRICAL CHARACTERISTICS 3/ Part Number Peak Inverse Voltage Reverse Recovery Time 5/ Average DC Output Current 4/ Tc = Case Temperature Surge Nonrepetitive Maximum Forward Voltage Drop Maximum Leakage Current @PIV Replacement Part Number PIV (KV) Max (ns) 25 C 25 C SDAD103 F 2.5 F 2.5 500 SDAD103 F 5.0 F 5.0 500 SDAD103 D 5.0 F 5.0 500 SDAD103 F 7.5 F 7.5 500 SDAD103 D 7.5 F 7.5 500 SDAD103 D 10 F 10 500 SDAD103 C 15 F 15 500 SDAD103 H 2.5 F SDAD103 H 5.0 F SDAD103 H 7.5 F SDAD103 H 10 F SDAD103 H 15 F NOTES: 1/ 2/ 3/ 4/ 2.5 5.0 7.5 10 15 500 500 500 500 500 If(avg) Ifsm 75 C 50 C 60 C 100 C 5.00 8.00 6.25 150 3.75 6.00 4.70 150 3.30 4.80 4.10 80 2.50 4.00 3.10 150 2.25 3.50 2.80 80 1.75 2.50 2.20 80 1.18 1.67 1.47 30 High Current Versions 10.0 16.0 12.5 200 7.50 12.0 9.40 200 5.00 8.00 6.20 200 3.50 5.00 4.40 125 2.36 3.33 2.94 125 SDAD103 Package: Vf (V) If (A) 25 C 6.0 2.5 11 1.8 11 1.6 17 1.2 17 1.1 22 0.85 27 0.65 3.30 6.80 8.65 12.0 17.2 8.0 6.2 4.0 2.5 1.6 Ir (uA) 25 C 10 10 5 10 5 5 5 30 30 20 10 10 UGF-2.5 UGF-5 UGD-5 UGF-7.5 UGD-7.5 UGD-10 UGC-15 ----------- For ordering information, price, curves, and availability- Contact factory. Screening based on MIL-PRF-19500. Screening flows available on request. Unless otherwise specified, All electrical characteristics @25ºC. Tc = 50 ºC typical operation in oil. Tc = 75 ºC is typical ambient Ta = 25 ºC unheatsunk. Tc = 60 ºC typical operation with extender plates in air. 5/ Recovery conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0065C DOC