SDAD103_1

SDAD103 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com 2,500 to 15,000 VOLTS STANDARD RECOVERY STACKABLE HIGH VOLTAGE RECTIFIER FEATURES: Stackable to 600 kV+ PIV 2.5kV to 15kV High Current Ratings Standard Reverse Recovery Time Void-free, Hermetically Sealed Diode Cells Controlled Avalanche Modular Design for Easy Stacking Storage and Operating Temps -65°C to +150°C Available in Fast, Ultra Fast and Hyper Fast Versions TX, TXV, and S-Level Screening Available 2/ Direct Replacement Upgrade – Microsemi / Unitrode type UGE-2.5 through type UGB-10 and 1N5603 Part Number/Ordering Information 1/ SDAD10 3 __ __ __ __ 2/ │ │ │ │ └ Screening Designer’s Data Sheet            __ = Not Screened ││││ TX = TX Level │ │││ TXV = TXV Level ││││ S = S Level │ │ │ │ └ Reverse Recovery Time │ │ __= Standard Recovery Time │││ │ │ └ Voltage 2.5 = 2.5kV, 5 = 5kV, ││ 7.5 = 7.5kV, 10 = 10kV, and │└ 15 = 15kV │ Power Rating (See Below) │ └ Package Size = 3 Inches Diameter ELECTRICAL CHARACTERISTICS 3/ Peak Inverse Voltage Reverse Recovery Time 5/ Average DC Output Current Tc = Case Temperature 4/ Surge Nonrepetitive Maximum Forward Voltage Drop Maximum Leakage Current @PIV Replacement Part Number Part Number SDAD103E2.5 SDAD103E5.0 SDAD103 B 5.0 SDAD103 E 7.5 SDAD103 B 7.5 SDAD103 B 10 SDAD103 A 15 SDAD103 H 2.5 SDAD103 H 5.0 SDAD103 H 7.5 SDAD103 H 10 SDAD103 H 15 NOTES: 1/ 2/ 3/ 4/ PIV (KV) Max (ns) 25 C 25 C 75 C 2.5 5000 6.60 5.0 5.0 7.5 7.5 10 15 2.5 5.0 7.5 10 15 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5.00 4.40 3.30 3.00 2.30 1.54 12.2 10.0 6.60 4.60 3.08 If(avg) 50 C 10.0 7.50 60 C 8.25 6.25 Ifsm 100 C 200 200 Vf (V) If (A) 25 C 5.0 3.30 10 9.0 13 13 17 25 3.10 6.20 8.45 12.1 16.8 2.5 2.2 1.6 1.5 1.1 0.72 10 8.0 5.0 3.5 2.8 Ir (uA) 25 C 10 15 5 10 5 5 2 30 30 20 10 10 6.60 5.50 100 5.00 4.10 200 4.80 3.75 100 3.50 2.85 100 2.07 1.84 30 High Current Versions 20.0 16.5 300 15.0 12.5 300 10.0 8.20 250 7.0 5.70 150 4.14 3.68 125 SDAD103 Package: UGE-2.5 UGE-5 1N5603 UGB-5 UGE-7.5 UGB-7.5 UGB-10 ------------- For Ordering Information, Price, Curves, and Availability- Contact Factory. Screening based on MIL-PRF-19500. Screening flows available on request. Unless Otherwise Specified, All Electrical Characteristics @25ºC. Tc = 50 ºC typical operation in oil. Tc = 75 ºC is typical ambient Ta = 25 ºC unheatsunk. Tc = 60 ºC typical operation with extender plates in air. 5/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0066C DOC