SDR1-12TX

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR1-12 thru SDR1-16 and SDR1-12SMS and SDR1-16SMS 1.0 AMP 1200 ─ 1600 VOLTS 70 nsec ULTRA FAST RECTIFIER FEATURES: Designer’s Data Sheet Part Number/Ordering Information 1/ SDR1 __ __ __ │ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Package Type __ = Axial Leaded SMS = Surface Mount Square Tab Family -12 = 1200 V -14 = 1400 V -16 = 1600 V • • • • • • • • • • Ultra Fast Recovery: 70 ns Max @ 25°C 4/ Single Chip Construction PIV to 1600 Volts Low Reverse Leakage Current Hermetically Sealed For High Efficiency Applications Available in Axial and Surface Mount Versions Metallurgically Bonded TX, TXV, and S-Level Screening Available2/ Hyper Fast Versions available MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage Rectified Forward Forward Current (Resistive Load, 60 Hz, Sine Wave, TA = 25°C) SYMBOL SDR1-12 and SDR1-12SMS SDR1-14 and SDR1-14SMS SDR1-16 and SDR1-16SMS VALUE 1200 1400 1600 1 25 -65 to +175 35 18 SMS UNIT Volts VRRM VRWM VR IO IFSM TOP and TSTG RθJL RθJE Amp Amps °C °C/W Peak Surge Current (8.3 msec Pulse, Half Sine Wave Superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Operating & Storage Temperature Thermal Resistance, Junction to Lead, L = 3/8” (Axial) Junction to End Tab (SMS) NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp. Axial Leaded NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0103B DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR1-12 thru SDR1-16 and SDR1-12SMS and SDR1-16SMS ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS Instantaneous Forward Voltage Drop (IF = 1Adc, 300- 500 μs Pulse, TA = 25°C) Instantaneous Forward Voltage Drop (IF = 1Adc, 300- 500 μs Pulse, TA = -55°C) Maximum Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 25°C) Maximum Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 100°C) Junction Capacitance (VR = 10Vdc, TA = 25°C , f = 1MHz) Maximum Reverse Recovery Time 4/ SYMBOL VALUE VF1 VF2 2.90 3.60 UNIT Vdc Vdc μA mA pf ns IR1 IR2 CJ trr 5 .5 20 70 Axial Leaded Case Outline 5/: DIMENSIONS DIM. MIN. MAX. A --- .150” B --- .190” C .027” .033” D .95” --- Square Tab Surface Mount Case Outline 5/: DIMENSIONS DIM. MIN. A .134” B .200” C .022” D .002” MAX. .153” .280” .028” --- NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp. 5/ For information on operating curves, contact factory. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0103B DOC