SDR1ASM

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR1ASM & SMS thru SDR1MSM & SMS 1.0 AMPS 50 ─ 1000 VOLTS 50 – 70 nsec ULTRA FAST RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SDR1 __ __ __ │ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level (for SM, use –S) │ └ Package Type SM = Surface Mount Round Tab SMS = Surface Mount Square Tab • • • • • • • • Voltage A = 50 V B = 100 V D = 200 V G = 400 V J = 600 V K = 800 V M = 1000 V • Ultra Fast Recovery: 50-70 ns Max @ 25ºC 4/ 80-120 ns Max @ 100ºC 4/ Single Chip Construction PIV to 1000 Volts (1200V Version available) Low Reverse Leakage Current Hermetically Sealed For High Efficiency Applications Available in Round and Square Tab Versions Metallurgically Bonded TX, TXV, and S-Level Screening Available 2/ Hyper Fast Version available FEATURES: MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA = 25ºC) SYMBOL SDR1A .. SDR1B .. SDR1D .. SDR1G .. SDR1J .. SDR1K .. SDR1M .. VALUE 50 100 200 400 600 800 1000 1 25 -65 to +175 28 UNIT VRRM VRWM VR Volts IO IFSM TOP and TSTG RθJE SM (Round Tab) Amp Amps ºC ºC/W Peak Surge Current (8.3 msec Pulse, Half Sine Wave Superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25ºC) Operating & Storage Temperature Thermal Resistance, Junction to End Tab NOTES: SM & SMS SMS (Square Tab) 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0003H DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR1ASM & SMS thru SDR1MSM & SMS ELECTRICAL CHARACTERISTICS 3/ Maximum Limit SYMBOL SDR1A .. thru SDR1D .. SDR1G .. thru SDR1J .. SDR1K .. thru SDR1M .. SDR1A .. thru SDR1D .. SDR1G .. thru SDR1J .. SDR1K .. thru SDR1M .. SDR1A .. thru SDR1D .. SDR1G .. thru SDR1J .. SDR1K .. thru SDR1M .. SDR1A .. thru SDR1D .. SDR1G .. thru SDR1J .. SDR1K .. thru SDR1M .. SDR1A .. thru SDR1D .. SDR1G .. thru SDR1J .. SDR1K .. thru SDR1M .. SDR1A .. thru SDR1D .. SDR1G .. thru SDR1J .. SDR1K .. thru SDR1M .. 15 40 25 15 50 60 70 DIM. MIN. Package SM 1.3 1.3 2.5 1.45 1.45 2.65 SMS 0.96 1.3 1.9 2.1 2.1 2.3 5 CHARACTERISTICS Instantaneous Forward Voltage Drop (IF = 1Adc, 300 µs Pulse, TA = 25ºC) Instantaneous Forward Voltage Drop (IF = 1Adc, 300 µs Pulse, TA = -55ºC) Reverse Leakage Current (Rated VR, 300 µs Pulse Minimum , TA = 25ºC) Reverse Leakage Current (Rated VR, 300 µs Pulse Minimum , TA = 100ºC) Junction Capacitance (VR = 10Vdc, TA = 25ºC , f = 1MHz) Reverse Recovery Time 4/ Round Tab Surface Mount (SM): UNIT Vdc VF1 VF2 Vdc IR1 μA IR2 250 μA CJ 15 10 50 60 70 pf trr ns DIMENSIONS DIM. MIN. MAX. Square Tab Surface Mount (SMS) : DIMENSIONS MAX. A B C D .095” .105” .190” .210” .010” .030” ----- A B C D .134” .200” .022” .002” .153” .280” .028” --- NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0003H DOC