SDR1MSM

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR1ASM, SMM, & SMS thru SDR1MSM, SMM, & SMS 1.0 AMPS 50 ─ 1000 VOLTS 50 – 70 nsec ULTRA FAST RECTIFIER FEATURES: Designer’s Data Sheet Part Number/Ordering Information 1/ SDR1 __ __ __ │ │ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Package Type SM = Surface Mount Round Tab SMM = Surface Mount Mini SMS = Surface Mount Square Tab • • • • • • • • • Voltage A = 50 V B = 100 V D = 200 V G = 400 V J = 600 V K = 800 V M = 1000 V • Ultra Fast Recovery: 50-70 ns Max @ 25°C 4/ 80-120 ns Max @ 100°C 4/ Single Chip Construction PIV to 1000 Volts (1200V Version available Low Reverse Leakage Current Hermetically Sealed For High Efficiency Applications Available in Round, Mini, and Square Tab Versions Metallurgically Bonded TX, TXV, and S-Level Screening Available 2/ Hyper Fast Version available MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA = 25°C) SYMBOL SDR1A .. SDR1B .. SDR1D .. SDR1G .. SDR1J .. SDR1K .. SDR1M .. VALUE 50 100 200 400 600 800 1000 1 25 -65 to +175 28 45 35 UNIT VRRM VRWM VR Volts IO IFSM TOP and TSTG SM SMM SMS Amp Amps °C °C/W Peak Surge Current (8.3 msec Pulse, Half Sine Wave Superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Operating & Storage Temperature Thermal Resistance, Junction to End Tab RθJE NOTES: 1/ For Ordering Information, Price, Operating Curves, and AvailabilityContact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. SM (Round Tab) SMM (Mini) SMS (Square Tab) 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0003D DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR1ASM, SMM, & SMS thru SDR1MSM, SMM, & SMS ELECTRICAL CHARACTERISTICS 3/ Maximum Limit SYMBOL SDR1A .. thru SDR1D .. SDR1G .. thru SDR1J .. SDR1K .. thru SDR1M .. SDR1A .. thru SDR1D .. SDR1G .. thru SDR1J .. SDR1K .. thru SDR1M .. SDR1A .. thru SDR1D .. SDR1G .. thru SDR1J .. SDR1K .. thru SDR1M .. SDR1A .. thru SDR1D .. SDR1G .. thru SDR1J .. SDR1K .. thru SDR1M .. SDR1A .. thru SDR1D .. SDR1G .. thru SDR1J .. SDR1K .. thru SDR1M .. SDR1A .. thru SDR1D .. SDR1G .. thru SDR1J .. SDR1K .. thru SDR1M .. 20 15 15 10 60 70 70 DIM. 40 25 15 50 60 70 VF2 VF1 Package SMM 0.96 2.7 2.7 1.05 2.85 2.85 SM 1.3 1.3 2.5 1.45 1.45 2.65 5 SMS 0.96 1.3 1.9 2.1 2.1 2.3 CHARACTERISTICS Instantaneous Forward Voltage Drop (IF = 1Adc, 300 μs Pulse, TA = 25°C) Instantaneous Forward Voltage Drop (IF = 1Adc, 300 μs Pulse, TA = -55°C) Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 25°C) Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 100°C) Junction Capacitance (VR = 10Vdc, TA = 25°C , f = 1MHz) Reverse Recovery Time 4/ UNIT Vdc Vdc IR1 μA IR2 250 μA CJ 10 10 50 pf trr ns Round Tab Surface Mount (SM): DIMENSIONS DIM. MIN. MAX. Square Tab Surface Mount (SMS) : DIMENSIONS MIN. MAX. Mini (SMM): A .095” .105” B .190” .210” C .010” .030” D ----DIMENSIONS DIM. MIN. MAX. A B C D .134” .200” .022” .002” .153” .280” .028” --- A B C D NOTES: .075” .085” .135” .145” .010” .030” ----- 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0003D DOC