SDR1RHF

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR1PHF thru SDR1WHF and SDR1PHFSMS and SDR1WHFSMS 1 AMP HYPER FAST RECTIFIER 1300 ─ 1800 VOLTS 40 nsec Designer’s Data Sheet Part Number/Ordering Information 1/ SDR1 __ __ __ __ 2/ │ ││ └ Screening │ ││ __ = Not Screened │ ││ TX = TX Level │ ││ TXV = TXV │ ││ S = S Level │ ││ │ │ └ Package Type __ = Axial Leaded │ │ SMS = Surface Mount Square Tab │ │ │ └ Reverse Recovery │ HF = Hyper Fast │ └ Family/Voltage P = 1300 V T = 1600 V R = 1400 V V = 1700 V S = 1500 V W = 1800 V • • • • • • • • • FEATURES: Hyper Fast Recovery: 40 ns Max @ 25 C Single Chip Construction PIV to 1800 Volts Low Reverse Leakage Current Hermetically Sealed For High Efficiency Applications Available in Axial and Surface Mount Versions Metallurgically Bonded 2/ TX, TXV, and S-Level Screening Available ° 4/ MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage SDR1PHF SDR1RHF SDR1SHF SDR1THF SDR1VHF SDR1WHF SYMBOL VRRM VRWM VR IO IFSM TOP and TSTG RθJL RθJE Axial Lead VALUE 1300 1400 1500 1600 1700 1800 UNIT Volts Rectified Forward Forward Current (Resistive Load, 60 Hz, Sine Wave, TL = 25°C, L = 1/8”) 1.0 12 -65 to +175 35 28 SMS Amp Amps °C °C/W Peak Surge Current (8.3 msec Pulse, Half Sine Wave Superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Operating & Storage Temperature Thermal Resistance, Junction to Lead, L = 3/8” (Axial) Junction to End Tab (SMS) NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp. 5/ For information on operating curves, contact factory. NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0129A DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR1PHF thru SDR1WHF and SDR1PHFSMS and SDR1WHFSMS ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS Instantaneous Forward Voltage Drop (IF = 1 Adc, 300- 500 μs Pulse, TA = 25°C) Instantaneous Forward Voltage Drop (IF = 1 Adc, 300- 500 μs Pulse, TA = -55°C) Maximum Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 25°C) Maximum Reverse Leakage Current (Rated VR, 300 μs Pulse Minimum , TA = 100°C) Junction Capacitance (VR = 100Vdc, TA = 25°C , f = 1MHz) Maximum Reverse Recovery Time 4/ SYMBOL VALUE VF1 VF2 4.80 5.0 UNIT Vdc Vdc μA μA pf ns IR1 IR2 CJ trr 20 200 20 40 DIMENSIONS Axial Leaded Case Outline: DIM. A B C D MIN. .100” .125” .027” 1.00” MAX. .150” .200” .033” --Square Tab Surface Mount Case Outline: DIMENSIONS DIM. A B C D MIN. .135” .175” .022” .002” MAX. .155” .250” .028” --- NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0129A DOC