SDR2UF2.0SMS

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR2UF1.8 and SMS SDR2UF2.0 and SMS 2 AMPS 1800 - 2000 VOLTS 70 nsec ULTRA FAST RECOVERY RECTIFIER Axial Surface Mount Square Tab (SMS) Designer’s Data Sheet FEATURES: • • • • • • • • • Ultra Fast Recovery: 70 nsec maximum PIV to 2400 Volts Low Reverse Leakage Current Hermetically Sealed Low Thermal Resistance Low trr Change at High Temperature (typical: trr = 120ns @ 100°C) TX, TXV, and Space Level Screening Available. Contact Factory. Fast Recovery Versions Available. Contact Factory. Single Junction Construction Replaces 1N6512 and 1N6513 in many applications. • MAXIMUM RATINGS Reverse Voltage SDR2UF1.8 & SMS SDR2UF2.0 & SMS Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA=25oC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Superimposed on IO, Allow Junction to Reach Equilibrium between Pulses, TA=25oC) Temperature Range Maximum Thermal Resistance Junction to Lead, L = 0.125” (Axial Lead) Junction to End Tab (Surface Mount) Operating Storage Symbol VRRM VRWM VR IO Value 1800 2000 Units Volts 2 Amps IFSM 30 Amps TOP Tstg RθJL RθJE -65 to +175 -65 to +200 6 4 o o C C/W NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0063D DOC SDR2UF1.8 and SMS SDR2UF2.0 and SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Breakdown Voltage (IR = 50 µA, TA = 25oC, 300µsec minimum Pulse) Instantaneous Forward Voltage Drop (TA = 25oC, 300 – 500 µsec Pulse) Instantaneous Forward Voltage Drop (TA = -55oC, 300 – 500 µsec Pulse) Reverse Leakage Current (VR =85% rated VR, 300µsec minimum Pulse) Junction Capacitance (VR = 50 VDC, TA = 25oC, f = 1 MHz) Reverse Recovery Time (IF =500 mA, IR =1 A, IRR =250 mA, TA = 25oC) Case Outline: (Axial) SDR2UF1.8 & SMS SDR2UF2.0 & SMS IF1 =1 A IF2 =2 A IF3 =1 A IF4 =2 A TA = 25oC TA = 100oC Symbol BVR VF1 VF2 VF3 VF4 IR1 IR2 CJ trr Min –– –– –– –– –– –– –– –– –– –– DIM A B C D Max 1800 2000 3.60 4.20 3.80 4.60 1.5 200 20 70 MIN –– 0.240” 0.045” 1.00” Unit Volts Volts Volts Volts Volts µA µA pF ns MAX 0.170” 0.270” 0.051” –– Case Outline: (SMS) DIM A B C D MIN 0.195” 0.290” 0.020” 0.002” MAX 0.205” 0.330” 0.030” –– NOTES: Consult manufacturing for operating curves. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0063D DOC