SDR429SMSTX

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR429 SDR429SMS 1 AMP, 700 V Hyper Fast Rectifier • • • • • • • • DESIGNER’S DATA SHEET SDR429 __ __ │ │ │ │ │ └ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level Package Type __ = Axial Leaded SMS = Surface Mount Square Tab Features: High Voltage 700 V continuous Very Fast Switching < 20 nS Low High Temperature Leakage < 15 µA Very Fast Switching @ 100 º C < 35 nS Hermetically Sealed Higher Voltages Available, consult Factory TX, TXV, S Level screening Available2/ Available Axial Leaded or Surface Mount (Square Tab) Maximum Ratings Symbol Value Units Peak Repetitive and Peak Surge Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 hz Sine Wave) Non Repetitive Surge Current (8.3 ms Pulse Half Sine Wave Superimposed on Io) Operating & Storage Temperature Maximum Thermal Resistance Junction to Lead, L = 1/8 " Junction to End Tab NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. VRRM VRSM Io IFSM Top & Tstg RθJL RθJE Axial Lead Diode 700 1.0 18 -55 to +175 12 9 Volts Amps Amps ºC ºC/W SMS NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0008C Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR429 Electrical Characteristic Symbol Min Typ Max Units Instantaneous Forward Voltage Drop (Tj = 25ºC, 300 µsec pulse) Instantaneous Forward Voltage Drop (Tj = 100ºC, 300 µsec pulse) Instantaneous Forward Voltage Drop (Tj = -55ºC, 300 µsec pulse) Reverse Leakage Current (Vr = 700 V, Tj = 25ºC, 300 µsec pulse) Reverse Leakage Current (Vr = 700 V, Tj = 100ºC, 300 µsec pulse) Reverse Recovery Time (IF = 0.5A, IR = 1A, IRR = 0.25A) Junction Capacitance (Vr=10 Vdc, Tc=25ºC, f=1Mhz) Case Outline: (Axial) If = 1A If = 3A If = 1A If = 3A If = 1A If = 3A Vf1 Vf2 Vf3 Vf4 Vf5 Vf6 Ir1 Ir2 –– –– –– –– –– –– –– –– –– –– DIM A B C D 2.35 3.5 1.65 2.5 3.0 4.5 0.2 5.0 17 32 22 2.5 3.8 1.8 2.7 3.75 5.30 1.0 20 20 35 30 MIN 0.120” 0.150” 0.027” 1.00” Volts Volts Volts µA µA nsec pF MAX 0.145” 0.190” 0.033” -- TA = 25ºC TA = 100ºC tRR1 tRR2 Cj D B D ØC ØA Case Outline: (SMS) B A DIM A B C D A MIN 0.170” 0.200” 0.020” 0.005” MAX 0.180” 0.240” 0.030” -- C D NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0008C