SDR620CT_1

Solid State Devices, Inc. 14701Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR620CT/CAP6 THRU SDR622CT/CAP6 80 AMP 100-200 Volts 35nsec COMMON ANODE & CATHODE HYPERFAST CENTERTAP RECTIFIER 6 PIN TO-259 DESIGNER’S DATA SHEET Features: • Hyper Fast Recovery: 35nsec Maximum • Isolated low profile package • Ceramic Feed Thrus • Eutectic Die Attach Available • Hermetically Sealed • Low Reverse Leakage • TX, TXV, and Space Level Screening Available. Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage 3/ SDR620CT/CAP6 SDR621CT/CAP6 SDR622CT/CAP6 Symbol VRRM VRWM VR Io Value 100 150 200 Units Volts Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25ºC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25ºC) 1/ Operating & Storage Temperature Maximum Thermal Resistance Junction to Case, each individual diode Junction to Case, 2/ 1/ Each pair of diodes 2/ All legs connected together 3/ 250V class available 80 Amps IFSM Top & Tstg 500 Amps -65 to +200 1.2 0.65 ºC RθJL ºC/W NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0015B DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR620CT/CAP6 THRU SDR622CT/CAP6 Electrical Characteristics Instantaneous Forward Voltage Drop (IF=10Adc, TA = 25ºC, 300 µsec pulse) (IF=20Adc, TA = 25ºC, 300 µsec pulse) Instantaneous Forward Voltage Drop (IF= 10Adc, TA = 100ºC, 300 µsec pulse) (IF= 10Adc, TA = -55ºC, 300 µsec pulse) Reverse Leakage Current (Rated VR, TA = 25ºC, 300 µsec pulse minimum) Reverse Leakage Current (Rated VR, TA = 100ºC, 300 µsec pulse minimum) Junction Capacitance (VR = 10 Vdc, TA = 25ºC, f = 1MHz) Reverse Recovery Time (IF = 0.5A, IR = 1A, IRR = 0.25A, TA = 25ºC ) CASE OUTLINE: TO-259-6 PIN OUT: COMMON ANODE PIN 1: CATHODE PIN 2: ANODE PIN 3: CATHODE PIN 4 Symbol VF1 Min –– Max 1.0 1.2 0.9 1.15 10 1 225 35 Units Volts VF2 IR1 IR2 CJ trr –– –– –– –– –– Volts µA mA pF nsec PIN 3 COMMON CATHODE PIN 4: ANODE PIN 5: CATHODE PIN 6: ANODE PIN 5 PIN 2 PIN 6 PIN 1 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0015B DOC