SDR620G

Solid State Devices, Inc. 14701Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR620G THRU SDR622G 20 AMP 100-200 Volts 35nsec Hyper Fast Rectifier Cerpack DESIGNER’S DATA SHEET Features: • Replaces 1N5816 Devices • Hyper Fast Recovery: 35nsec Maximum • High Surge Rating • Low Reverse Leakage Current • Low Junction Capacitance • Hermetically Sealed Surface Mount Power Package • Gold Eutectic Die Attach Available • Ultrasonic Aluminum Wire Bonds • Low Inductance Flat Leads • TX, TXV, and Space Level Screening Available. Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage 1/ SDR620G SDR621G SDR622G Symbol VRRM VRWM VR Io Value 100 150 200 Units Volts Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25ºC) 2/ Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25ºC) 2/ Operating & Storage Temperature Maximum Thermal Resistance Junction to Case, 2/ 1/ Higher Voltage class available 2/ Both Anode leads tied together 20 Amps IFSM Top & Tstg RθJL 300 Amps -65 to +200 1.1 ºC ºC/W NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0067B DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR620G THRU SDR622G Electrical Characteristics Instantaneous Forward Voltage Drop (IF=10Adc, TA = 25ºC, 300 µsec pulse) 1/ (IF=20Adc, TA = 25ºC, 300 µsec pulse) 1/ Instantaneous Forward Voltage Drop (IF= 10Adc, TA = 100ºC, 300 µsec pulse) 1/ (IF= 10Adc, TA = -55ºC, 300 µsec pulse) 1/ Reverse Leakage Current (Rated VR, TA = 25ºC, 300 µsec pulse minimum) Reverse Leakage Current (Rated VR, TA = 100ºC, 300 µsec pulse minimum) Junction Capacitance (VR = 10 Vdc, TA = 25ºC, f = 1MHz) Reverse Recovery Time (IF = 0.5A, IR = 1A, IRR = 0.25A, TA = 25ºC ) Case Outline: Cerpack Pin 1: Anode Pin 2: Anode Case: Cathode Symbol VF1 Min –– Max 1.0 1.2 0.9 1.15 10 1 225 35 Units Volts VF2 IR1 IR2 CJ trr –– –– –– –– –– Volts µA mA pF nsec .300 .105±.010 .340 .020 .370 .315 1 2 .140 .210 .010±.002 (.050) 2x .060 (.040) 2x .100 1/ For best results connect pin 1&2 together in operation NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0067B DOC