SDR624CTC

` Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR623CTC Thru SDR626CTC 1/ DESIGNER’S DATA SHEET CERAMIC TO-254 40A 35nsec 300-600 V Hyper Fast Centertap Rectifier Features: • • • • • • • • • • Hyper Fast Recovery: 35nsec Maximum 3 / High Surge Rating Low Reverse Leakage Current Low Junction Capacitance Hermetically Sealed Package Gold Eutectic Die Attach Ultrasonic Aluminum Wire Bonds Common Anode and Doubler Versions Available Flat Leads for Low Inductance TX, TXV, and S-Level Screening Available 2 / Maximum Ratings SDR623CTC SDR624CTC SDR625CTC SDR626CTC Symbol VRRM VRWM VR Io IFSM TOP & TSTG Rθ JC Value 300 400 500 600 40 200 -65 to +200 1.0 2.1 Units Peak Repetitive Reverse Voltage Average Rectified Forward Current 4/ (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) Peak Surge Current 5/ (8.3 ms Pulse, Half Sine Wave, TA = 25 °C) Operating & Storage Temperature Maximum Total Thermal Resistance Junction to Case 4 / Junction to Case 5 / Volts Amps Amps ºC ºC/W Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, rec. to .25 Amp. 4/ Both Legs Tied Together. 5/ Each Leg. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0125B DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR623CTC Thru SDR626CTC Symbol TA = 2 5 ºC TA = 2 5 ºC TA = 100 ºC TA = - 55 ºC TA = 25 ºC TA = 1 00 ºC VF1 VF2 VF3 VF4 IR1 IR2 trr CJ Electrical Characteristics, per leg Instantaneous Forward Voltage Drop (IF = 10Adc, Pulse) (IF = 20Adc, Pulse) Instantaneous Forward Voltage Drop (IF = 10Adc, Pulse) Reverse Leakage Current (100% of rated VR, Pulse) Reverse Recovery Time (IF = 0.5A, IR = 1A, IRR = 0.25A, TA = 2 5ºC) Junction Capacitance ( VR = 10VDC, T A = 25ºC, f = 1MHz) Max 1.4 1.6 1.3 1.5 50 5 35 150 Units VDC VDC µA mΑ nsec pF PIN ASSIGNMENT Configuration Common Cathode Common Anode Doubler Doubler Reverse TO-254C Outline: Pin 1 Anode 1 Cathode 1 Cathode A node Pin 2 Cathode Anode Common Commo n Pin 3 Anode 2 Cathode 2 Anode Cathode Tolerances, Unless Specified Otherwise - .XX ± .020” .XXX ± .010” NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0125B DOC