SDR6305

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR6304 thru SDR6307 Part Number/Ordering Information 1/ SDR __ __ Designer’s Data Sheet │└ Screening 2/ __ = Not Screened │ TX = TX Level │ TXV = TXV Level │ S = S Level │ └ Family/Voltage 6304 = 50V 6305 = 100V 6306 = 150V 6307 = 200V 70 Amp Ultra Fast Recovery Rectifier 50 - 200 Volts 50 nsec Features: • • • • • • • • Fast Recovery: 50nsec Maximum Low Forward Voltage Drop Low Reverse Leakage Current Single Chip Construction Hermetically Sealed For High Efficiency Applications Replacement for 1N6304, 1N6305, and 1N6306 2/ TX, TXV, and S-Level Screening Available Maximum Ratings 3/ Peak Repetitive Reverse Voltage and DC Blocking Voltage @ 100µA Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) SDR6304 SDR6305 SDR6306 SDR6307 Symbol VRRM VRWM VR Io IFSM TOP & TSTG RθJC Value 50 100 150 200 70 800 Units Volts Amps Amps ºC ºC/W Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25 °C) Operating & Storage Temperature Thermal Resistance (Junction to Case) -55 to +175 0.8 Notes: 1/ For ordering information, price, operating curves, and availability- Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, all maximum ratings/electrical characteristics @25°C. DO-5 NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0141A DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR6306 Symbol VF1 VF2 TA = 25 ºC TA = 150 ºC TA = 25 ºC IR1 IR2 tRR CJ Electrical Characteristics 3/ Maximum Instantaneous Forward Voltage Drop (IF =70Adc, TA = 25 ºC, 300-500μs Pulse) Maximum Instantaneous Forward Voltage Drop (IF =70Adc, TA = 150 ºC, 300-500μs Pulse) Maximum Reverse Leakage Current (Rated VR, 300μs minimum pulse) Maximum Reverse Recovery Time (IF = 500 mA, IR = 1 Amp, IRR = 250 mA) Maximum Junction Capacitance (VR = 10VDC, TA = 25ºC, f = 1MHz) Value 0.975 0.84 25 30 50 700 Units VDC VDC μA mA nsec pF T able 1- PIN ASSIGNMENT Code __ R Configuration Normal Reverse Terminal Anode Cathode Stud Cathode Anode DO-5 Outline (Normal Pin Configuration Shown): .687 .667 1.00 MAX .060 MIN .453 .422 Ø.220 .249 .667 .375 MAX MAX 1/4-28 UNF-2A .200 .115 .080 MAX Ø.175 .140 .450 MAX NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0141A DOC