SDR647CTS1TX

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR643CTS1 thru SDR647CTS1 50 AMP 300-700 Volts 35 nsec Ultra Fast Centertap Rectifier Features: • • • • • • • • Ultra Fast Recovery: 25 nsec typical High Surge Rating Low Reverse Leakage Current Low Junction Capacitance Hermetically Sealed Power Surface Mount Package Ceramic Seals Available Higher Currents & Voltages Available – Contact Factory TX, TXV, and S-Level Screening Available2/ DESIGNER’S DATA SHEET SDR64 ___ CT ___ ___ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV │ │ S = S Level │ └ Package │ S1= SMD1 └ Voltage/Family 3 = 300 V 4 = 400 V 5 = 500 V 6 = 600 V 7 = 700 V M aximum Ratings Peak Repetitive Reverse and DC Blocking Voltage SDR643CTS1 SDR644CTS1 SDR645CTS1 SDR646CTS1 SDR647CTS1 Symbol VRRM VRWM VR Io Value 300 400 500 600 700 50 Units Volts Average Rectified Forward Current note 3 (Resistive Load, 60 Hz Sine Wave, TA = 25ºC) Peak Surge Current note 3 (8.3 ms Pulse, Half Sine Wave Superimposed on Io, Allow Junction to Reach Equilibrium Between Pulses, TA = 25ºC) Operating & Storage Temperature Maximum Thermal Resistance Junction to Case, each individual diode Junction to Case, note 3 Amps IFSM Top & Tstg Rθ JC 500 -65 to +200 2.00 1.20 SMD1 Amps ºC ºC/W 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500; contact factory for screening flow. 3/ Both legs tied together *Also available in other packages: TO-254, TO-254Z, TO-257, and 28 Pin CLCC – Consult Factory NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0087C DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR643CTS1 thru SDR647CTS1 Electrical Characteristics (Per Leg) Characteristics Instantaneous Forward Voltage Drop ( IF = 5Adc, TA = 25ºC, 300 msec pulse) (IF = 10Adc, TA = 25ºC, 300 msec pulse) (IF = 15Adc, TA = 25ºC, 300 msec pulse) (IF = 20Adc, TA = 25ºC, 300 msec pulse) (IF = 30Adc, TA = 25ºC, 300 msec pulse) Instantaneous Forward Voltage Drop ( IF = 15Adc, TA = 100ºC, 300 msec pulse) (IF = 30Adc, TA = 100ºC, 300 msec pulse) (IF = 15Adc, TA = -55ºC, 300 msec pulse) (IF = 30Adc, TA = -55ºC, 300 msec pulse) Reverse Leakage Current (Rated VR , TA = 25ºC, 300 msec pulse min) Reverse Leakage Current (Rated VR , TA = 100ºC, 300 msec pulse min) (Rated VR , TA = 125ºC, 300 msec pulse min) (Rated VR , TA = 150ºC, 300 msec pulse min) Junction Capacitance (VR = 10 Vdc, TA = 25ºC, f = 1MHz) Reverse Recovery Time ( IF = 0.5 A, IR = 1A, IRR = 0.25A, TA = 25ºC) ( IF = 0.5 A, IR = 1A, IRR = 0.25 A, TA = 100ºC) ( IF = 10 A, dIF/dt = 100A/us, TA = 25ºC) ( IF = 10 A, dIF/dt = 100A/us, TA = 100ºC) Symbol VF1 VF2 VF3 VF4 VF5 VF7 VF9 Typical 0.94 1.0 1.05 1.07 1.1 0.93 1.00 1.15 1.20 30 10 2 8 25 60 25 70 35 2.7 1.83 80 3.6 1.0 Maximum 1.35 1.5 1.25 1.5 150 50 10 120 35 - Unit Volts VF6 VF8 SDR647CTS1 ALL OTHER Volts IR1 IR2 IR3 IR4 CJ trr1 trr2 trr3 IRM3 ta/t b trr4 IRM4 ta/t b μA mA pF nsec nsec nsec A nsec A - Case Outline: SMD1 PIN OUT: PIN 1: ANODE 1 PIN 2: CATHODE PIN 3: ANODE 2 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0087C DOC