SDR6WTX

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR6W series 6A 5 μsec 1400 to 1800 V Standard Recovery Rectifier Features: • • • • • • • • Standard Recovery: 5 usec Maximum High Surge Rating: 75 Amps @ 8.3 mS and 500A @ 100 μS Low Reverse Leakage Current: 5 μA Low Junction Capacitance: 40 pF Low Thermal Resistance: 8 - 12 ºC/W Single Chip Construction Available in Fast and Ultra Fast Speeds. Consult Factory. TX, TXV, and S Level Screening2/ DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ SDR6 * __ __ __ │ │ │ │ │ │ │ │ │ │ └ │ └ Screening2/ │ __ * = Not Screened │ S = S Level │ TX = TX Level │ TXV = TXV └ Package __ *= Axial w/ .050" lead diameter A = Axial w/ .040" lead diameter SMS = Surface Mount Square Tab T = 1600 V W = 1800 V Voltage R = 1400 V Maximum Ratings Peak Repetitive Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave) Symbol SDR6R SDR6T SDR6W TL @ 1/8" = 25 °C max TTAB = 55 °C max TL @ 1/8" = 25 °C max TTAB = 55 °C max VRRM Io IFSM TOP & TSTG Axial @ 1/8 " SMS RθJL Axial Value 1400 1600 1800 6 75 -65 to +175 12 8 Units Volts Amps Amps ºC ºC/W Peak Surge Current 3/ (8.3 ms Pulse, Half Sine Wave) Operating & Storage Temperature Maximum Total Thermal Resistance 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flow Available on Request. Surface Mount Square Tab (SMS) 3/ Surge rated at 500A maximum, pulse width = 100 μsec. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0094B DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR6W series Symbol TA = 25ºC TA = -55ºC TA = 25ºC TA = 100ºC TA = 25ºC TA = 25ºC VF1 VF2 Electrical Characteristics Instantaneous Forward Voltage Drop (IF = 6A, 300 – 500 μsec Pulse) Reverse Leakage Current (100% of rated VR, 300 μs pulse min.) Reverse Recovery Time (IF = 0.5A, IR = 1A, IRR = 0.25A, TA = 25ºC) Junction Capacitance (VR = 10VDC, TA = 25ºC, f = 1MHz) *Available Part Numbers: SDR6W SDR6T SDR6R Case Outline: (Axial) Min –– Typ 1.10 1.20 1.0 10 1.5 22 Max 1.25 1.40 5.0 50 5 40 Units VDC μA μsec pF IR1 IR2 tRR CJ –– –– –– SDR6WA SDR6TA SDR6RA SDR6WSMS SDR6TSMS SDR6RSMS DIM A B C (std) C (A outline) D MIN –– 0.135” 0.047” 0.037” 1.00” MAX 0.168” 0.156” 0.053” 0.043” –– Case Outline: (SMS) DIM A B C D MIN 0.173” 0.180” 0.022” 0.002” MAX 0.177” 0.210” 0.028” –– Note: Dimensions prior to soldering. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0094B DOC