SDR807

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR803 Thru SDR817 Part Number/Ordering Information 1/ SDR __ __ Designer’s Data Sheet │ │ └ Screening 2/ __ = Not Screened ││ TX = TX Level ││ TXV = TXV Level ││ S = S Level ││ │ └ Pin Configuration __ = Normal (Cathode to Stud) │ (See Table 1) R = Reverse (Anode to Stud) │ └ Family/Voltage 803 = 50V 808 = 300V 813 = 700V 804 = 100V 809 = 350V 814 = 800V 805 = 150V 810 = 400V 815 = 900V 806 = 200V 811 = 500V 816 = 1000V 807 = 250V 812 = 600V 817 = 1100V 100A, 60nsec, 50-1100 V Ultra Fast Recovery Rectifier Features: • • • • • • • • Fast Recovery: 60nsec Maximum Low Forward Voltage Drop Low Reverse Leakage Current Single Chip Construction PIV to 1100 Volts Hermetically Sealed For High Efficiency Applications TX, TXV, and S-Level Screening Available 2/ Maximum Ratings 4/ SDR803 SDR804 SDR805 SDR806 SDR807 SDR808 SDR809 SDR810 SDR811 SDR812 SDR813 SDR814 SDR815 SDR816 SDR817 Symbol Value 50 100 150 200 250 300 350 400 500 600 700 800 900 1000 1100 100 1000 800 700 600 Units Peak Repetitive Reverse Voltage and DC Blocking Voltage @ 100µA VRRM VRWM VR Volts Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) SDR803 – 806 SDR807 – 809 SDR810 – 814 SDR815 – 817 Io Amps Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25 °C) IFSM TOP & TSTG RθJC Amps ºC ºC/W Operating & Storage Temperature Thermal Resistance (Junction to Case) Notes: -55 to +175 0.85 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA. 4/ Unless Otherwise Specified, All Maximum Ratings/Electrical Characteristics @25°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0059G DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR803 Thru SDR817 Symbol SDR803 – 806 SDR807 – 810 SDR811 – 814 SDR815 – 817 SDR803 – 806 SDR807 – 810 SDR811 – 814 SDR815 – 817 TA = 25 ºC TA = 100 ºC TA = 25 ºC VF1 Electrical Characteristics 4/ Maximum Instantaneous Forward Voltage Drop (IF =100Adc, TA = 25 ºC, 300-500μs Pulse) Maximum Instantaneous Forward Voltage Drop (IF =100Adc, TA = -55 ºC, 300-500μs Pulse) Value 1.00 1.50 1.85 1.90 1.10 1.60 1.95 2.00 100 10 60 700 Units VDC VF2 IR1 IR2 tRR CJ VDC μA mA nsec pF Maximum Reverse Leakage Current (Rated VR, 300μs minimum pulse) Maximum Reverse Recovery Time (IF = 500 mA, IR = 1 Amp, IRR = 250 mA) Maximum Junction Capacitance (VR = 10VDC, TA = 25ºC, f = 1MHz) Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA. 4/ Unless Otherwise Specified, All Maximum Ratings/Electrical Characteristics @25°C. Table 1- PIN ASSIGNMENT Code Configuration Terminal Stud __ R Normal Reverse Anode Cathode Cathode Anode DO-5 Outline (Normal Pin Configuration Shown): NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0059G DOC