SDR934-61

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR933/61 thru SDR936/61 30 Amp ULTRA FAST RECTIFIER 300 – 600 Volts 35 nsec FEATURES: • • • • • • • • • Ultra Fast Reverse Recovery Time: 35 nsec Max Isolated Package Reverse Voltage to 600 Volts Low Reverse Leakage Hermetically Sealed Single Chip Construction 200°C Operating Temperature Ultrasonic Aluminum Wire Bonds 2/ TX, TXV, and S-Level Screening Available Designer’s Data Sheet Part Number/Ordering Information 1/ SDR93___ │ │ │ │ │ │ │ │ └ __ __ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Package Type /61 = TO-61 Device Type ( VRWM ) 3 = 300V 4 = 400V 5 = 500V 6 = 600V MAXIMUM RATINGS 3/ RATING SYMBOL SDR933/61 SDR934/61 SDR935/61 SDR936/61 SDR932/61 SDR933/61 SDR934/61 SDR935/61 Peak Repetitive Reverse Voltage DC Blocking Voltage (IR = 100μA) VRM(rep) VR RMS Reverse Voltage Vr IO IFM(rep) IFSM VALUE 300 400 500 600 140 210 280 350 30 120 300 UNIT Volts Volts Amps Amps Amps °C °C/W Half Wave Rectified Forward Current, Averaged Over Full Cycle (Resistive Load, 60 Hz, Sine Wave, TC = 25°C) Peak Repetitive Forward Current (TC = 55°C, 8.3 ms pulse, allow junction to reach equilibrium between pulses) Peak Surge Current (TC = 25°C, half sinewave 8.3 ms pulse or equivalent DC) Operating & Storage Temperature Thermal Resistance NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. TOP and TSTG -65 to +175 Junction to Case 1.5 RθJC TO-61 NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0135A DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR933/61 thru SDR936/61 SYMBOL VF2 CHARACTERISTICS Max Instantaneous Forward Voltage Drop (IF = 30Adc, TC = 25°C, 300 μs Pulse) Max Instantaneous Forward Voltage Drop (IF = 30Adc, TC = 100°C, 300 μs Pulse) SDR933/61, SDR934/61, SDR935/61, SDR936/61, SDR933/61, SDR934/61, SDR935/61, SDR936/61, VR = 300V VR = 400V VR = 500V VR = 600V VR = 300V VR = 400V VR = 500V VR = 600V MAX 1.7 UNIT Vdc VF1 1.5 Vdc Max Reverse Leakage Current (TC = 25°C) IR1 100 μAdc Maximum Reverse Leakage Current (Rated VR, TC = 100°C) Max Junction Capacitance (TA = 25°C, VR = 10V) IR2 5.0 mAdc CJ 250 pf CHARACTERISTICS Reverse Recovery Time (IF = 500mA, IR = 1A, IRR = 250mA) (IF = 1A to VR = 30Vdc) SYMBOL trr TYP 30 MAX 35 UNIT nsec Case Outline: 2 Pin TO-61 2 Ø.687 .610 Ø.610 .570 .687 .667 NOTES: 1 DIMENSION DOES NOT INCLUDE SEALING FLANGES. 2 3 PACKAGE CONTOUR OPTIONAL WITHIN DIMENSIONS SPECIFIED. POSITION OF LEADS IN RELATION TO HEXAGON IS NOT CONTROLLED. .415 .340 3 Ø.072 .047 .875 .640 2 .460 .325 .270 1 MAX .150 .090 Ø.249 .220 .090 MAX SITTING PLANE 1/4-28 UNF-2A .455 .422 NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0135A DOC