SDR9400S20

Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR9400S10 thru SDR9400S20 400 AMPS 1000 ─ 2000 VOLTS 25 µsec STANDARD RECOVERY HIGH CURRENT RECTIFIER DO-9 Designer’s Data Sheet FEATURES: • • • • • • • • • • • • Forward Current to 400 Amps PIV 1000 to 2000 Volts Transient Voltage Rating of 200 Volts Above PIV Pressure Contact Device Single Chip Construction Low Forward Voltage Drop Hermetically Sealed For High Power Applications For Reverse Polarity Version Add Suffix “R” Fast Recovery Version Available (0.7 µsec typical) Higher Voltage Versions up to 5000 Volts Available TX, TXV, and Space Level Screening Available MAXIMUM RATINGS 1/ Peak Repetitive Reverse Voltage and DC Blocking Voltage SDR9400S10 SDR9400S15 SDR9400S20 Symbol VRRM VRWM VR Value 1000 1500 2000 400 3500 -55 to +175 0.14 Unit Volts Average Rectified Forward Current Over Full Cycle (Resistive Load, 60 Hz, Sine Wave, TA=25oC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA=25oC) Operating and Storage Temperature Maximum Thermal Resistance (Junction to Case) NOTES: 1/ Mounting force = 238.95 in.-lbs. ± 10% for non-lubricated threads Typical weight = 220 grams IO IFSM TOP & Tstg RθJC Amps Amps o C o C/W NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RP0007B DOC Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR9400S10 thru SDR9400S20 ELECTRICAL CHARACTERISTICS Instantaneous Forward Voltage Drop ((IF = 400 Amp Pulse, TJ = 25oC) Instantaneous Forward Voltage Drop (IF = 400 Amp Pulse, TJ = 175oC) Reverse Leakage Current (Rated VR pulse, TJ = 25oC) Reverse Leakage Current, Per Leg (Rated VR pulse, TJ = 175oC) Reverse Recovery Time (IFM = 400 A, VR =400 V, di/dt = -25 µs, RS = 10Ω, CS = 0.5 µF, TA = 25oC) CASE OUTLINE: DO-9 Symbol VF VF IR IR trr Value 1.15 1.10 2 40 25 Unit Volts Volts mA mA µsec *For information on curves, contact the Factory Representative for Engineering Assistance.