SDR9T

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR9P thru SDR9T Series 9.0 AMP STANDARD RECOVERY RECTIFIER 1300 ─ 1500 VOLTS Designer’s Data Sheet Part Number/Ordering Information SDR9 __ __ __ __ │ │ │ └ Screening 2/ │││ __ = Not Screened │││ TX = TX Level │││ TXV = TXV Level │││ S = S Level │││ │ │ └ Package Type __ = Axial Leaded ││ SMS = Surface Mount Square Tab ││ ││ │ └ Recovery Time │ __ = Standard Recovery │ └ Voltage/Family P = 1300V R = 1400V T = 1500V 1/ • • • • • • • • FEATURES: PIV to 1500 Volts Hermetically Sealed Low Reverse Leakage Current Single Chip Construction Replaces Larger DO-4 Rectifiers Low Thermal Resistance Available in Axial & Square Tab Versions 2/ TX, TXV, and S-Level Screening Available Fast,and Ultra Fast Versions AvailableContact Factory • MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60Hz, Sine Wave, TA = 25°C ) SYMBOL SDR9P SDR9R SDR9T VALUE 1300 1400 1500 9.0 130 -65 to +175 8 4 UNIT Volts Amps Amps °C °C/W SMS VRRM VRWM VR IO IFSM TJ and TSTG RθJL RθJE Axial Leaded Peak Surge Current (8.3 ms pulse, half sine wave, superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Operating & Storage Temperature Thermal Resistance NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. Junction to Lead for Axial, L =.125" Junction to End Tab for Surface Mount NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0136A DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR9P thru SDR9T Series ELECTRICAL CHARACTERISTICS3/ CHARACTERISTICS SYMBOL IF = 9.0 Adc, TA = +25°C IF = 6.0 Adc, TA = +25°C IF = 9.0 Adc, TA = -55°C TA = +25°C TA =+100°C SDR9P SDR9R SDR9T MAXIMUM 1.20 1.10 1.40 1.0 50 1300 1400 1500 50 5 UNIT Instantaneous Forward Voltage Drop (pulsed) VF1 VF2 VF3 IR1 IR2 BVR CJ trr Vdc μA V (min) pF μs Reverse Leakage Current (VR = 80% rated) Minimum Breakdown Voltage (IR = 50 uA) Junction Capacitance (VR = 10 Vdc, f = 1MHz, TA = 25°C) Reverse Recovery Time (IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C) Package Outlines: DIMENSIONS (inches) DIM. DIMENSIONS (inches) DIM. A (SMS) B C D A B C D Minimum --.210 .037 1.000 Maximum .170 .250 .043 --- Minimum .170 .260 .020 .002 Maximum .180 .300 .030 --- AXIAL SMS NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0136A DOC