SED120LB100_1

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SED120LB100, SED120LE100, and SED120LT100 120 A / 100 V Schottky Rectifier Designer’s Data Sheet Part Number / Ordering Information 1/ SED120 __ __ __ ││ └ Screening 2/ __ = Not Screened ││ TX = TX Level TXV = TXV ││ S = S Level ││ │ └ Voltage 100 = 100 V │ │ └ Package LB = Sedpack 3 LE = Sedpack 3 with Lead LT = Sedpack 3 with Lead and Heatsink • • • • • • • • FEATURES: 100 Volt Schottky Rectifier Average Output Current 120 Amps Low Reverse Leakage Low Forward Voltage Drop Hermetically Sealed Power Surface Mount Package Guard Ring for Overvoltage Protection Eutectic Die Attach TX, TXV, and Space Level Screening Available 2/. Consult Factory. MAXIMUM RATINGS 3/ Peak Repetitive Reverse and DC Blocking Voltage Average Rectified Forward Current o (Resistive Load, 60 Hz, Sine Wave, TC = 100 C) Peak Surge Current (8.3 ms pulse, half sine wave superimposed on Io, o allow Junction to reach equilibrium between pulses, TA = 25 C) Operating & Storage Temperature Maximum Thermal Resistance (Junction to Case) SEDPACK 3 (LB) SEDPACK 3 with Lead (LE) Symbol VRRM VRWM VR IO IFSM T OP & Tstg RθJC Value 100 120 1000 -55 to +150 0.3 Units Volts Amps Amps o o C C/W SEDPACK 3 with Lead and Heatsink (LT) NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0014E DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SED120LB100, SED120LE100, and SED120LT100 Symbol VF1 VF2 VF3 IR1 IR2 CJ ELECTRICAL CHARACTERISTICS 3/ Instantaneous Forward Voltage Drop IF = 40 A IF = 120 A (TA=25ºC, 300 μsec pulse) Instantaneous Forward Voltage Drop TA= 125ºC, IF = 120 A (300 μsec pulse) Reverse Leakage Current (Rated VR, TA = 25ºC, 300 μsec pulse minimum) Reverse Leakage Current (Rated VR, TA = 125ºC, 300 μsec pulse minimum) Junction Capacitance o (VR = 5V, f = 1MHz, TA = 25 C) Maximum Value 0.71 0.95 0.78 5.0 100 3200 Units VDC VDC mA mA pF NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. PIN ASSIGNMENT Package Sedpack 3 (LB) Sedpack 3 with Lead (LE) Sedpack 3 with Lead (LT) TOP Anode Anode Anode BOTTOM Cathode Cathode Cathode LEAD --Anode Anode Case Outline: SEDPACK 3 Case Outline: SEDPACK 3 with Lead Case Outline: SEDPACK 3 with Lead and Heatsink NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0014E DOC