SFT1192-59

SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SFT1192/59 2 AMP 500 VOLTS PNP TRANSISTOR TO-59 DESIGNER'S DATA SHEET FEATURES: • • • • • • BVCEO 400V. Fast Switching. High Frequency. Low Saturation Voltage. 200oC Operating, Gold Eutectic Die Attach. Designed for Complementary Use with SFT6800. MAXIMUM RATINGS Collector-Emitter Voltage RBE = 1 kOhms Collector-Base Voltage Emitter-Base Voltage Collector Current Base Current Total Device Dissipation @ TC=100oC Derate above 25oC Operating and Storage Temperature Thermal Resistance, Junction to Case CASE OUTLINE: TO-59 Pin Out: 1 - Collector 2 - Base 3 - Emmiter SYMBOL VCEO VCER VCBO VEBO IC IB PD TJ, TSTG RΘJC VALUE 400 500 500 10 2 0.5 20 133 -65 to +200 7.5 UNITS Volts Volts Volts Amps Amps W mW/oC o C o C/W NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TR0008C SFT1192/59 SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Collector-Emitter Breakdown Voltage (IC =5mADC) (IC =100mADC, RBE =1kΩ) Collector-Base Breakdown Voltage (IC = 100uADC) Emitter-Base Breakdown Voltage (IE = 20uADC) Collector Cutoff Current (VCB = 450VDC) Collector Cutoff Current (VCE = 400VDC, VEB = 1.5VDC) Emitter Cutoff Current (VEB = 6VDC) DC Current Gain* (VCE =10VDC) (IC = 1.0mADC) (IC = 50mADC) (IC = 500mADC) SYMBOL BVCEO BVCER BVCBO BVEBO ICBO ICEV IEBO MIN 400 500 500 10 80 60 40 50 - MAX 1.0 10 10 0.4 2.0 1.5 2.0 75 300 250 2500 UNITS V V V µA µA µA HFE Collector-Emitter Saturation (IC =50mADC, IB = 5mADC) Voltage* (IC =500mADC, IB =50mADC) Base-Emitter Saturation Voltage* (IC =50mADC, IB = 5mADC) (IC =500mADC, IB =50mADC) VCE(SAT) VBE (SAT) fT Cob Cib t(on) t(off) VDC VDC MHz pf pf ns ns Current Gain Bandwidth Product (IC = 70mADC , VCE = 30VDC, f = 20MHz) Output Capacitance (VCB= 20VDC , IE = 0ADC, f = 1.0MHz) Input Capacitance (VBE= 2VDC , IC = 0ADC, f = 1.0MHz) Turn On Time Turn Off Time (VCC = 100VDC , IC = 500mADC, VEB(OFF)=3.7VDC, IB1=IB2= 50mADC) *Pulse Test: Pulse Width = 300µs, Duty Cycle = 2%