SFT3904A2_1

Solid State Devices, Inc. SFT3904A2 Series Dual Microminiature Package 200 mA 40 Volts Dual NPN Transistor Features: • • • • • • High Speed Switching Transistor Multiple Devices Reduce Board Space High Power Dissipation: Up to 600 mW / device Replacement for 2N3904AU TX, TXV, S-Level screening available P NP complimentary parts available (SFT3906A2) 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ SFT3904A2 __ __ │ └ Scre ening 2/ __ = Commercial │ TX = TX Level │ TXV = TXV Level │ S = S Level │ └ Package GW = Gullwing Maximum Ratings Symbol Value Units Collector – Emitter Voltage Collector – Base Voltage Emitter – Base Voltage Continues Collector Current Power Dissipation @ TC = 25ºC Operating & Storage Temperature VCEO VCBO VEBO IC PD Top & Tstg RθJC 40 60 6 200 600 -65 to +200 0.29 Volts Volts Volts mAmps mW ºC ºC/mW Maximum Thermal Resistance (Junction to Case) Gullwing (GW) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TR0034 B Doc Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SFT3904A2 Series Symbol Min Max Units Electrical Characteristic 4/ Collector – Emitter Sustaining Voltage Collector – Base Breakdown Voltage Emitter – Base Breakdown Voltage Collector Cutoff Current Collector Cutoff Current Emitter Cutoff Current DC Forward Current Transfer Ratio * IC = 1 mA IC = 10 µA IC = 10 µA Vce = 30 V, Vbe = - 3.0 V Vcb = 30 V Veb = 3.0 V VCE = 1.0V, IC = 0.1 mA VCE = 1.0V, IC = 1.0 mA VCE = 1.0V, IC = 10 mA VCE = 1.0V, IC = 50 mA VCE = 1.0V, IC = 100 mA BVCEO BVCBO BVEBO ICEX ICBO IEBO 40 60 6 –– –– –– 40 70 100 60 30 –– –– 0.65 –– 300 –– –– –– –– –– –– 100 –– –– –– –– 50 50 50 –– –– 300 –– –– 0.2 0.3 0.85 0.95 –– 4.0 8.0 35 35 200 50 400 5.0 Volts Volts Volts nA nA nA HFE Collector – Emitter Saturation Voltage * Base – Emitter Saturation Voltage * Frequency Transition Output Capacitance Input Capacitance Turn-on Delay Time Rise Time Switch Times Storage Time Fall Time Small Signal Current Gain (f = 1 kHz ) Noise Figure IC = 10mA, IB = 1.0mA VCE(Sat) IC = 50mA, IB = 5.0mA IC = 10mA, IB = 1.0mA VBE(Sat) IC = 50mA, IB = 5.0mA VCE = 20V, IC = 20mA VCE = 10V, f = 1MHz VCE = 0.5V, f = 1MHz Vcc=3V, IC = 10 mA IB1 = 1mA, IB2=-1mA Vbe(off) = 0.5 V VCE = 10V, IC = 1.0 mA fT cob cib td tr ts tf hfe NF Volts Volts MHz pF pF n sec Ic = 100 uA, Vce = 5 V, Rs = 1.0 kΩ, f = 1 kHz db NOTES: * Pulse Test: Pulse Width = 300µsec, Duty Cycle = 2% 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screening per MIL-PRF-19500 3/ For Package Outlines Contact Factory. 4/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. PIN ASSIGNMENT Pin 2 Pin 3 Pin 4 Base1 Emitter1 Collector2 Available Part Numbers: SFT3904A2GW Package GW Pin 1 Collector1 Pin 5 Base2 Pin 6 Emitter2