SHA489

SHA489 Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet • • • • • • • • • • FEATURES: Power Dissipation 1 kW @ 25oC Case Extremely Large SOA Ultra Fast Switching, ts = 100 ns typical (Outperforms IGBT) OFHC Copper Package Ideal for Motor Control/Power Systems Extremely Low RθJC: 0.1oC/W Can Be Driven From Low Level Logic Higher Current and Voltages Available. Consult Factory Alternate Packages Available. Consult Factory. TX, TX-V, and S-Level Screening Available. Consult Factory. IGBT REPLACEMENT ULTRA FAST SWITCHING DEVICE 200 Amps 250 Volts 1000 Watts MAXIMUM RATINGS Output Voltage (Collector – Emitter) Out/In Isolation (Collector – Gate) Input Voltage (Gate – Emitter) Current Sink Capabilities (peak) Input Current (transistor switched off)* Total Device Power Dissipation @ TC = 25ºC Derate above 75ºC Storage Temperature Symbol V3-1 V3-2 V2-1 I3 I2 PD Tstg Value 250 250 ±20 200 -5 1000 8 -55 to +150oC Units V V V A A W W/ºC ºC THERMAL CHARACTERISTICS Thermal Resistance (Junction – Case) Power Section Symbol RθJC Value 0.1 Units ºC/W ELECTRICAL CHARACTERISTICS Output Breakdown (Collector – Emitter) Out/In Isolation (Collector – Gate) Input Breakdown Voltage Output Leakage Current (I3 = 10 mA, V2-1 = -4 V) (I3 = 300 µA, I1 = 0 V) (I1 = -100 µA, I3 = 0 V) (I1 = 100 µA, I3 = 0 V) (V2-1 = -4 V, V3-1 ≤ 250 V) Symbol BV3-1 BV3-2 BV2-1 I3 Min 250 250 19 -8 –– Max –– –– 22 –– 5 Units Volts Volts Volts mA NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0020A DOC SDA489 Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Saturation Voltage Output Reverse Recovery Capacitance SOA No Heatsink On Time Storage Time Fall Time V3-1 = 100 VDC, I3 = 10 A Load Limited, V2-1 adjusted for 20 A I3 without load = (IB1), I2 = (IB2)= 2 A Symbol (I3 = 100 ADC, V2-1 = 12 V)* (I3 = 200 ADC, V2-1 = 12 V) V3-1 (SAT) (I3 = -100 ADC, V2-1 = -4 V)* Min –– –– –– –– –– –– –– –– Max 3.2 7.0 1.6 70 5000 5000 1 6 500 200 250 Units Volts ns pF sec ns ns ns (IF = I3 = 0.5 A, IR = I3 = -1 A, to IRR = I3 = 0.25 A) Output (V3-1 = 10 V, V2-1 = -4 V) Input (V3-1 = 0 V, V2-1 = 0 V) (I3 = 100 ADC, V2-1 = 12 V) (I3 = 60 ADC, V2-1 = 12 V) t(on) t(off) trr C3-1 C2-1 td tr ts tf –– –– –– NOTES: * Pulse Test: Pulse Width = 300µsec, Duty Cycle = 2% 1. Maximum forward voltage measured with instantaneous forward pulse of 300 µsec minimum. 2. Unless Otherwise Specified, All Electrical Characteristics @25ºC PACKAGE OUTLINE: SHA489 .045 Available Part Numbers SHA489 PIN ASSIGNMENT (Standard) Package Collector Emitter Gate Pin 3 Pin 1 Pin 2 SHA489