SHM15UF_1

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SHM15UF - SHM140UF and SHM15UFSMS - SHM140UFSMS 50-250 mA 1500 ─ 14000 VOLTS 60-100 nsec HIGH VOLTAGE RECTIFIER FEATURES: Ultra Fast Recovery: 60-100 nsec Maximum PIV to 14000 Volts Hermetically Sealed Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature TX, TXV, and Space Level Screening Available2/ Designer’s Data Sheet Part Number / Ordering Information 1/ SHM_ _ UF __ __ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ L ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ L ⏐ ⏐ ⏐ L L Screening 2/ = None TX = TX Level TXV = TXV Level S = S Level Package ____ = Axial SMS = Surface Mount Square Tab Recovery Time UF = Ultra Fast Voltage 15 = 1500 20 = 2000 25 = 2500 30 = 3000 40 = 4000 50 = 5000 60 = 6000 80 = 8000 100 = 10000 120 = 12000 140 = 14000 • • • • • • • ELECTRICAL CHARACTERISTICS Part Number Symbol Units Conditions Volts 25°C Peak Inverse Voltage PIV Average Rectifier Current I0 mA 100°C Maximum Reverse Current IR @ PIV μA Maximum Forward Voltage VF Volts 100°C 25°C Maximum Surge Current (1 Cycle) IFSM Amps 25°C Maximum Reverse Recovery Time trr nsec 25°C Maximum Junction Capacitance CJ pF VR = 100V fT = 1MHZ L = 3/8” °C/W Typical Thermal Impedance θJE θJL SHM15UF SHM20UF SHM25UF SHM30UF SHM40UF SHM50UF SHM60UF SHM80UF SHM100UF SHM120UF SHM140UF 1500 2000 2500 3000 4000 5000 6000 8000 10000 12000 14000 250 250 250 150 150 150 100 100 100 100 50 L 150 150 150 SMS 145 145 145 90 90 90 60 60 60 60 30 25°C 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 25 25 25 25 25 25 25 25 25 25 25 10 10 10 14 14 14 20 20 20 22 26 15 15 15 10 10 10 5 5 5 5 1 60 60 60 60 60 60 60 60 60 60 100 8 8 8 4 4 4 2 2 2 2 2 55 55 55 55 55 55 55 55 55 55 85 65 65 65 65 65 65 65 65 65 65 95 1/ For Ordering Information, Price, Operating Curves, and Availability – Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in a suitable dielectric material. 4/ Max. forward voltage measured with instantaneous forward pulse of 300µsec minimum. 5/ Max. end tab temp. for soldering is 250°C for 5 sec maximum. 6/ Operating and storage temperature: -65°C to +175°C. 7/ Reverse Recovery Test Conditions: IF=50mA, IR=100mA, IRR=25mA, TA=25°C. Axial Leaded SMS NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0015C DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SHM15UF - SHM140UF and SHM15UFSMS - SHM140UFSMS DIMENSIONS: SHM15-50 DIM A B MIN ----.025” 1.0” DIMENSIONS: SHM60-140 DIM A B C D MIN ----.025” 1.0” DIMENSIONS: SHM15-50 DIM A B C D MIN .127” .280” .022” .002” DIMENSIONS: SHM60-140 DIM A B C D MIN .127” .360” .022” .002” MAX .140” .450” .028” --MAX .140” .320” .028” --MAX .140” .400” .033” --MAX .140” .300” .033” --- Case Outline: (Axial) D B D ØC ØA C D PACKAGE OUTLINE: Surface Mount Square Tab NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0015C DOC