SHM80

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SHM15 - SHM100 and SHM15SMS - SHM100SMS 100-250 mA 1500 ─ 10000 VOLTS 5 µsec HIGH VOLTAGE RECTIFIER FEATURES: Standard Recovery: 5 µsec Maximum PIV to 10000 Volts Hermetically Sealed Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature TX, TXV, and Space Level Screening Available2/ Designer’s Data Sheet Part Number / Ordering Information 1/ SHM _ _ ___ __ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ L ⏐ ⏐ ⏐ ⏐ L L Screening 2/ = None TX = TX Level TXV = TXV Level S = S Level Package ___ = Axial SMS = Surface Mount Square Tab Voltage 15 = 1500 20 = 2000 25 = 2500 30 = 3000 40 = 4000 50 = 5000 60 = 6000 80 = 8000 100 = 10000 • • • • • • • ELECTRICAL CHARACTERISTICS Part Number Peak Inverse Voltage PIV Volts 1500 2000 2500 3000 4000 5000 6000 8000 10000 Average Rectifier Current I0 mA 25°C 250 250 250 150 150 150 100 100 100 100°C L SMS 185 215 185 215 185 215 110 130 110 130 110 130 75 85 75 85 75 85 25°C 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Maximum Reverse Current Maximum Forward Voltage VF Volts 100°C 25 25 25 25 25 25 25 25 25 25°C 6 6 6 10 10 10 16 16 16 Maximum Surge Current (1 Cycle) IFSM Amps 25°C 15 15 15 10 10 10 5 5 5 Maximum Reverse Recovery Time tRR µsec 25°C 5 5 5 5 5 5 5 5 5 Maximum Junction Capacitance CJ pF VR = 100V fT = 1MHZ 8 8 8 4 4 4 2 2 2 °C/W 65 65 65 65 65 65 65 65 65 55 55 55 55 55 55 55 55 55 Typical Thermal Impedance θJL θJE Symbol Units Conditions SHM15 SHM20 SHM25 SHM30 SHM40 SHM50 SHM60 SHM80 SHM100 IR @ PIV μA 1/ For Ordering Information, Price, Operating Curves, and Availability – Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in a suitable dielectric material. 4/ Max. forward voltage measured with instantaneous forward pulse of 300µsec minimum. 5/ Max. lead temp. for soldering is 250°C, 3/8” from the case for 5 sec maximum. 6/ Operating and storage temperature: -65°C to +175°C. 7/ Reverse Recovery Test Conditions: IF=50mA, IR=100mA, IRR=25mA, TA=25°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial SMS (Square) DATA SHEET #: RV0007B DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SHM15 - SHM100 and SHM15SMS - SHM100SMS DIMENSIONS: SHM15-50 DIM A B C D MIN ----0.025” 1.0” DIMENSIONS: SHM60-100 DIM A B C D MIN ----0.025” 1.0” DIMENSIONS: SHM15-50 DIM A B C D MIN .127” .280” 0.022” .002” DIMENSIONS: SHM60-100 DIM A B C D MIN .127” .360” 0.022” .002” MAX .140” .450” 0.028” --MAX .140” .320” 0.028” --MAX .140” .400” 0.033” --MAX .140” .300” 0.033” --- PACKAGE OUTLINE: AXIAL RECTIFIER D B D ØC ØA B A A C D NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0007B DOC