SPA498-01

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPA498-01 1 AMP, 13000 VOLTS HIGH VOLTAGE RECTIFIER BRIDGE STACK Designer’s Data Sheet Part Number / Ordering Information 1/ SPA498-01 __ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level (+) Features: • • • • • Aerospace high voltage power supply applications High blocking voltage – 13 kV minimum Low mechanical stress design TX, TXV, and Space level screening available Consult factory for: Higher blocking voltages Faster switching speeds Other electrical configurations (–) MAXIMUM RATINGS Characteristic Peak Repetitive Reverse Voltage and DC Blocking Voltage Average Rectified Forward Current (Non-repetitive, t = 8.3 ms Pulse ) Symbol Bridge BR1 Bridge BR2 Bridge BR3 VR IO IFSM Top & Tstg RθJT Value 5000 3000 5000 1 25 -65 to +150 2.5 Units Volts Amps Amps ºC ºC/W Peak Surge Current (Non-repetitive, t = 8.3 ms Pulse, T A = 25ºC) Operating and Storage Temperature Maximum Thermal Resistance Junction to Tab ELECTRICAL SCHEMATIC (+) Notes: 1/ For ordering information, price, operating curves, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. (–) DATA SHEET #: PM0016B DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPA498-01 ELECTRICAL CHARACTERISTICS @ TA = 25ºC (unless otherwise specified) PARAMETER, per each Bridge (CR1-CR13) Leg Instantaneous Forward Voltage Drop (IF = 1.0 A, 300 – 500 µsec pulse) SYMBOL VF1 MIN - MAX 1.9 5.0 500 70 UNIT Volts µAmps nsec Reverse Leakage (VR = 1000 V, 300 µsec pulse minimum) TA = 25ºC TA = 100ºC IR1 IR2 tRR Reverse Recovery Time (IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A) CASE OUTLINES: ASPM – + Tolerances (unless specified): .XX±.03 .XXX±.010 NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0016B DOC