SPA555_1

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPA555 Series DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ SPA555 __ __ __ │ │ └ Screening2/ __ = Not screened ││ TX = TX Level ││ TXV = TXV Level ││ S = S Level │ └ Terminals3/ = Turret Terminals │ L = Copper Leads │ SM = Surface Mount │ └ Voltage M = 1000 V N = 1200 V 20A / 1000 - 1200V SiC SCHOTTKY SINGLE PHASE BRIDGE Features: • • • • • • • 1200V Silicon Carbide Schottky Rectifier Average Output Current 20 Amps No Reverse Recovery No Forward Recovery No Switching Time Change over Temperature Small Package Size (1.25 x 1.25 x 0.350”) Cases with Aluminum Heatsink are Available. Consult Factory • TX and TXV & S Level Screening Available2/ Maximum Ratings Peak Repetitive and Peak Surge Reverse Voltage Average Rectified Forward Current 4/ (Resistive Load, 60 Hz Sine Wave, TC = 55°C) Symbol SPA555M SPA555N VRRM VRSM VR IO IFSM Top & Tstg TJ RθJC SPA555 (L) Value 1000 1200 20 26 -55 to +150 -55 to +200 1.5 Units Volts Amps Amps ºC ºC ºC/W Peak Surge Current 5/ (8.3 ms Pulse, Half Sine Wave, TA = 25°C) Operating & Storage Temperature Junction Temperature Maximum Thermal Resistance Junction to Case SPA555 ( ) SPA555 (SM) NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0038D DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPA555 Series Electrical Characteristic 6/ Instantaneous Forward Voltage Drop (TA=25ºC, 300 - 500 μsec pulse) IF = 2.0 A IF = 5.0 A IF = 10 A TA= -55ºC, IF = 5 A TA= 150 ºC, IF = 5 A Symbol VF1 VF2 VF3 VF4 VF5 IR1 IR2 CJ Min –– –– –– –– –– –– –– Typ 1.20 1.50 2.10 1.35 2.30 20 100 280 Max 1.30 1.75 2.50 1.50 2.80 250 1000 320 Units VDC VDC μA μA pF Instantaneous Forward Voltage Drop (300 - 500 μsec pulse) Reverse Leakage Current (Rated VR, TA = 25ºC, 300 μsec pulse minimum) Reverse Leakage Current (Rated VR, TA = 150ºC, 300 μsec pulse minimum) Junction Capacitance (VR = 10V, f = 1MHz, TA = 25°C) NOTES: * Pulse Test: Pulse Width = 300 μsec, Duty Cycle = 2% 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ For Package Outlines Contact Factory. 4/ Derate Linearly at 0.28A/ºC for TC > 55ºC. 5/ Electrical Characteristic per Leg 6/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. Available Part Numbers: SPA555M; SPA555ML; SPA555MSM SPA555N; SPA555NL; SPA555NSM Mounting Diagram: 2/ T erminal Details SPA555 (SM) SPA555 (L) SPA555 ( ) Terminals are spaced at .650” square Leads are spaced at .250” Terminals are spaced at .650” square NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0038D DOC