SPD0802SMS

SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD0802 and SMS thru SPD1002 and SMS 2 AMP 80 - 100 VOLTS SCHOTTKY RECTIFIER AXIAL Designer's Data Sheet FEATURES: • PIV to 100 Volts • Extremely Low Forward Voltage Drop • Low Reverse Leakage Current • High Surge Capacity • High Voltage/Current Replacement for 1N5817 - 1N5819 Series • Hermetically Sealed • TX, TXV, and Space Level Screening Available SURFACE MOUNT (SMS) Maximum Ratings Reverse Voltage SPD0802 & SMS SPD0902 & SMS SPD1002 & SMS SYMBOL VRRM VRWM VR Io IFSM TOP & TSTG RθJL RθJE VALUE 80 90 100 2 40 -55 TO +125 15 12 UNITS Volts Average Rectified Forward Current (Resistive Load, 60Hz, Sine Wave, TL or TE = 55 oC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave Superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25oC) Operating and Storage Temperature Range Maximum Thermal Resistance Junction to Lead, L = .25" (Axial Lead) Junction to End Tab (Surface Mount) Amps Amps o C o C/W NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0006C SPD0802 and SMS thru SPD1002 and SMS Electrical Characteristics Instantaneous Forward Voltage Drop ( TA = 25oC, 300 - 500µs Pulse) Instantaneous Forward Voltage Drop ( IF = 1A, 300 - 500µs Pulse) Reverse Leakage Current (VR = Rated VR, TA = 25oC, 300 µs min Pulse) Reverse Leakage Current (VR = Rated VR, TA = 100oC, 300 µs min Pulse) Junction Capacitance (VR = 10V, f = 1 MHz, TA = 25oC) CASE OUTLINE: AXIAL LEAD SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SYMBOL IF = 0.5A IF = 1A IF = 2A TA = -55oC TA = 100oC VF1 VF2 VF3 VF4 VF5 IR1 IR2 CJ MIN --------- MAX 0.73 0.85 0.95 0.88 0.78 100 2 40 UNITS VDC VDC µA mA pF DIMENSIONS DIM A B C D MIN. 0.155 0.080 1.00" .028" MAX. 0.185" 0.107" -.032" Dimensions prior to solderdip CASE OUTLINE: SMS DIM A B C D DIMENSIONS MIN. 0.200" 0.125" 0.020" 0.002" MAX. 0.235" 0.135" 0.030" -- Dimensions prior to solderdip NOTES: Consult manufacturing for operating curves.