SPD210

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD205 thru SPD230 and SPD205SMS thru SPD230SMS 2.0 AMPS 50 ─ 300 VOLTS 25 ns HYPERFAST RECOVERY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SPD __ __ __ │ │ └ Screening 2/ ││ __ = Not Screened ││ TX = TX Level ││ TXV = TXV ││ S = S Level ││ │ └ Package Type __ = Axial Leaded │ SMS = Surface Mount Square Tab │ │ └ Voltage/Family 205 = 50V 210 = 100V 220 = 200V 230 = 300V • • • • • • • • Hyper Fast Reverse Recovery: 25ns Maximum 4/ PIV to 300 Volts Hermetically Sealed Low Forward Voltage Drop Void Free Chip Construction For High Efficiency Applications Available in Axial & Square Tab Versions TX, TXV, and S-Level Screening Available2/ Replacement for: 1N 5802, US thru 1N5806, US FEATURES: MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage Average Rectified Forward Current Peak Surge Current (8.3ms pulse, half sine wave superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) SYMBOL SPD205 SPD210 SPD220 SPD230 VALUE 50 100 200 300 2.0 50 -65 to +175 38 25 UNIT Volts VRRM VRWM VR IO IFSM TJ and TSTG RθJL RθJE Axial Leaded (Resistive Load, 60Hz, Sine Wave, TA = 25°C) Amps Amps °C °C/W SMS Operating & Storage Temperature Thermal Resistance NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C Junction to Lead for Axial, L =.375" Junction to End Tab for Surface Mount NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0099F DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD205 thru SPD230 and SPD205SMS thru SPD230SMS ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS Instantaneous Forward Voltage Drop IF = 2.0 Adc , TA = +25°C, 300 - 500μs pulse IF = 2.0 Adc , TA = -55°C, 300 - 500μs pulse (Rated VR, TA = +25°C) (Rated VR, TA =+100°C) SYMBOL VF1 VF2 IR1 IR2 CJ trr VALUE MAX UNIT 1.0 1.2 Vdc μA mA pF ns Reverse Leakage Current Junction Capacitance VR = 10 Vdc, f = 1MHz, TA = 25°C Maximum Reverse Recovery Time IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C 10 1 45 25 Package Outlines: DIMENSIONS (inches) DIM. DIMENSIONS (inches) A B C D Minimum --.190 .027 1.00 Maximum .140 .230 .033 --- DIM. A B C D Minimum .134 .230 .022 .002 Maximum .155 .280 .028 --- AXIAL SMS NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0099F DOC