SPD3595TX

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD3595 150 mA 125 VOLT 3 μsec STANDARD RECOVERY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SPD____ __ __ │ │ │ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Package Type __ = Axial Leaded SM = Surface Mount Round Tab (MELF) SMS = Surface Mount Square Tab FEATURES: • • • • • • • Standard Reverse Recovery Time: 3 μsec Max Hermetically Sealed Planar Passivated Chip For High Efficiency Applications Available in Axial, Subminiature Round Tab & Subminiature Square Tab Versions Faster Devices Available – Contact Factory TX, TXV, and S-Level Screening Available2/ Replacement for 1N3595 Device Type ( VRWM ) 3595 = 125 V • MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TC = 25°C) SYMBOL VRWM VR IO IFSM VALUE 125 150 500 -65 to +175 100 40 250 UNIT Volts mAmps mAmps °C °C/W Peak Surge Current (t = 1sec, Ta = 25°C) Operating & Storage Temperature Thermal Resistance Junction to End Tab (SM) Junction to End Tab (SMS) Axial- Junction to Lead @ .375” TOP and TSTG RθJE RθJE RθJL NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. Axial Leaded SM SMS NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0127A DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com 3/ SPD3595 ELECTRICAL CHARACTERISTICS CHARACTERISTICS Maximum Instantaneous Forward Voltage Drop (Pulsed, TA = 25°C) IF = 200mA IF = 100mA IF = 50mA IF = 10mA IF = 5mA IF = 1mA SYMBOL VF1 VF2 VF3 VF4 VF5 VF6 BVR MIN .83 .79 .74 .65 .60 .52 125 MAX 1.00 .92 .88 .80 .765 .70 --- UNIT Vdc Minimum Breakdown Voltage Ir = 50 μA Maximum Reverse Leakage Current (300 μs Pulse Minimum , TA = 25°C) Maximum Reverse Leakage Current (300 μs Pulse Minimum , TA = 150°C) Maximum Junction Capacitance (TA = 25°C , f = 1MHz, VR = 0V) Maximum Reverse Recovery Time (IF = IR = 10 mA, VR = 35V) VR = 125V VR = 125V Vdc IR1 IR2 ----- 1.0 3 8.0 3 nA μA pf μsec CJ trr AXIAL SM SMS DIM A B C D MIN MAX MIN .063” .130” .016” .001” MAX .067” .146” .022” --- MIN MAX .056” .140” 1.00” .018” .075” .180” 1.50” .022” .070” .165” .019” .003” .085” .195” .028” --- Dimensions prior to soldering NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0127A DOC