SPD4963-3

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD4963-1 thru SPD4963-3 Designer’s Data Sheet Part Number/Ordering Information 1/ SPD4963 _____ _____ │ │ │ │ │ └ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level Reverse Voltage -1 = 550V -2 = 670V -3 = 800V 1 AMP 550 – 800 VOLTS 130 nsec FAST RECOVERY RECTIFIER FEATURES: Fast Recovery: 130 nsec maximum PIV up to 800 Volts Low Reverse Leakage Current Hermetically Sealed Single Chip Construction High Surge Rating Low Thermal Resistance TX, TXV, and Space Level Screening Available2/ • • • • • • • • MAXIMUM RATINGS DC Blocking Voltage SPD4963-1 SPD4963-2 SPD4963-3 SPD4963-1 SPD4963-2 SPD4963-3 Symbol VR Value 500 600 600 550 670 800 1 20 -65 to +175 40 Units Volts Peak Repetitive Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA=25oC) VBR IO IFSM TOP & Tstg RθJL Volts Amps Amps o Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Superimposed on IO; Allow junction to reach equilibrium between pulses; TA=25oC) Operating and Storage Temperature Maximum Thermal Resistance Junction to Lead, L = 0.375” NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flow Available on Request. C o C/W Axial NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0051C DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD4963-1 thru SPD4963-3 ELECTRICAL CHARACTERISTICS Instantaneous Forward Voltage Drop (IF = 1 ADC, TA = 25°C, 300 - 500μsec Pulse) Instantaneous Forward Voltage Drop (IF = 60 ADC, TA = 25°C, 50 - 500μsec Pulse) Reverse Breakdown Voltage (IR = 100 μADC, TA = 25°C, 300μsec min Pulse) Reverse Leakage Current (Rated VR, 300μsec min Pulse) Storage Charge (IF = 100 mA, TA = 25oC) Reverse Recovery Time (IF = 500 mA, IR = 1 A, IRR = 250 mA, TA = 25oC) Case Outline: SPD4963-1 SPD4963-2 SPD4963-3 ALL SPD4963-1 SPD4963-2 SPD4963-3 TA = 25oC TA = 150oC Symbol VF1 Min –– –– –– –– Max 1.30 1.30 1.35 10.0 –– –– –– Unit Volts VF2 Volts VBR IR1 IR2 QS 550 670 800 –– –– –– Volts μA mA nC 2 1 30 trr –– 130 ns DIM A B C D MIN --0.027” 1.00” MAX 0.120” 0.250” 0.033” –– NOTES: Consult manufacturing for operating curves. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0051C DOC