Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com
SPD5415 thru SPD5420 and SPD5415SMS thru SPD5420SMS
3 AMPS 50 ─ 600 VOLTS 150 – 400 nsec FAST RECOVERY RECTIFIER
Designer’s Data Sheet
Part Number/Ordering Information 1/ SPD __ __ __
│ │ └ Screening 2/ ││ __ = Not Screened ││ TX = TX Level ││ TXV = TXV ││ S = S Level ││ │ └ Package Type __ = Axial Leaded │ SMS = Surface Mount Square Tab │ │ └ Voltage/Family 5415 = 50V 5416 = 100V 5417 = 200V 5418 = 400V 5419 = 500V 5420 = 600V
• • • • • • • • •
FEATURES:
Fast Reverse Recovery (Faster Versions Available) PIV to 600 Volts (Higher Voltages Available) Hermetically Sealed Controlled Avalanche Low Thermal Resistance High Surge Capability Available in Axial & Square Tab Versions Metallurgically Bonded TX, TXV, and S-Level Screening Available 2/ Replacement for: 1N 5415, US thru 1N5420, US
•
MAXIMUM RATINGS 3/ RATING
Peak Repetitive Reverse Voltage And DC Blocking Voltage Average Rectified Forward Current 4/ Peak Surge Current
(10 surges of 8.3 msec each at 1 minute intervals superimposed on IO = 0, VRSM = 0, TA = 100°C)
SYMBOL
SPD5415 SPD5416 SPD5417 SPD5418 SPD5419 SPD5420
TA = 55°C TA = 100°C
VALUE
50 100 200 400 500 600 3 2 80 -65 to +175 20 10
UNIT
VRRM VRWM VR IO IFSM TJ and TSTG RθJL RθJEC
Axial Leaded
Volts
Amps Amps °C °C/W
Operating & Storage Temperature Thermal Resistance
NOTES:
1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ These ratings are typical for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where TJ(MAX) is not exceeded. For 3.0 Amps at TA = 55°C, derate linearly at 22 mA for 55°C ≤ TA ≤ 100°C. For 2.0 Amps at TA = 100°C, derate linearly at 25 mA for 100°C ≤ TA ≤ 175°C.
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.
Junction to Lead for Axial, L =.375" Junction to End Tab for Surface Mount
SMS
DATA SHEET #: RC0106A
DOC
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com
SPD5415 thru SPD5420 and SPD5415SMS thru SPD5420SMS
ELECTRICAL CHARACTERISTICS
3/
CHARACTERISTICS
Forward Voltage IF = 1.5 Adc IF = 9 Adc, 300 µs Pulse IF = 0.5 Adc, TA = -55°C SPD5415 SPD5416 SPD5417 SPD5418 SPD5419 SPD5420 (Rated VR, TA = 25°C) (SPD5415 thru 5417- Rated VR, TA = 100°C) (SPD5418 thru 5420- Rated VR, TA = 100°C)
SYMBOL
VF1 VF2 VF3
VALUE
MIN MAX
UNIT
0.5
0.6 0.5 55 110 220 440 550 660
1.2
1.5 1.4
Vdc
Breakdown Voltage (IR = 50 µAdc)
V(BR)
Vdc
Maximum Reverse Leakage Current Junction Capacitance (VR = 4 Vdc, 100KHz ≤ f ≤ 1MHz) Maximum Reverse Recovery Time (IF = 500mA, IR = 1A, IRR = 250mA) NOTES:
IR1 IR2 IR3 CJ
1.0 20 30
120 150 250 400
µA pF ns
SPD5415 thru SPD5418 SPD5419 SPD5420
trr
1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory.
2/ Screened to MIL-PRF-19500.
3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC.
4/ These ratings are typical for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where TJ(MAX) is not exceeded. For 3.0 Amps at TA = 55°C, derate linearly at 22 mA for 55°C ≤ TA ≤ 100°C. For 2.0 Amps at TA = 100°C, derate linearly at 25 mA for 100°C ≤ TA ≤ 175°C.
Package Outlines:
DIMENSIONS (inches) DIM. DIMENSIONS (inches)
A B C D
Minimum .140 .190 .037 .90
Maximum .180 .260 .042 1.30
DIM. A B C D
Minimum .170 .240 .023 .002
Maximum .180 .300 .028 ---
AXIAL
SMS
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0106A
DOC
很抱歉,暂时无法提供与“SPD5419TXV”相匹配的价格&库存,您可以联系我们找货
免费人工找货