SPD5711_1

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD5711 and SPD5712 33 - 75 mA SCHOTTKY SMALL SIGNAL DIODE 16 – 50 VOLTS Part Number/Ordering Information 1/ SPD5711 SPD5712 Designer’s Data Sheet __ __ __ │ │ │ │ │ │ │ │ └ │└ Screening 2/ __ = Not Screened │ TX = TX Level │ TXV = TXV Level │ S = S Level │ └ Package __ = Axial SMS = Square Tab Surface Mount Features: • • • • • • Extremely Low Turn On Voltage Ultra Fast Switching Hermetically Sealed Replacement for 1N5711 and 1N5712 with Improved Thermal Resistance Primary Intended for High Level UHF/VHF Detection and Pulse Applications with a Broad Dynamic Range Axial or Square Tab Surface Mount Versions Available 2/ TX, TXV, and S-Level Screening Available Family/Rating SPD5711 = 50V, 33mA SPD5712 = 16V, 75mA Maximum Ratings 3/ Peak Repetitive Reverse and DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TC = 25 °C) Operating & Storage Temperature Maximum Thermal Resistance, Junction to Lead, L = 3/8” (Axial) Junction to End Tab (SMS) Notes: Symbol SPD5711 SPD5712 SPD5711 SPD5712 VRRM VRWM VR IO T OP & TSTG R0JL R0JE Value 70 20 33 75 -65 to+150 250 200 Units Volts mAmps °C ºC/W 1/ For ordering information, price, operating curves, and availability- Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Maximum ratings and electrical characteristics @ 25°C unless otherwise specified. Axial Package: Square Tab Surface Mount (SMS) Package: NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0008E DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD5711 and SPD5712 Symbol VBR IF = 1 mADC IF = 15 mADC IF = 35 mADC IF = 1 mADC IF = 15 mADC IF = 35 mADC SPD5711: Vr = 50V SPD5712: Vr = 16V Electrical Characteristics 3/ SPD5711 Min Max 70 –– –– –– –– –– –– –– –– –– –– 0.41 1.0 –– 0.55 1.0 –– 200 200 2.0 SPD5712 Min Max 20 –– –– –– –– –– –– –– –– –– –– 0.41 –– 1.0 0.55 –– 1.0 150 150 2.0 Units VDC VDC VDC nA μA pF Blocking Reverse Voltage (IR = 10 μA, TA = 25°C, 300 – 500 μs Pulse) Instantaneous Forward Voltage Drop (TA = 25°C, 300 – 500 μs Pulse) Instantaneous Forward Voltage Drop (TA = -55 ºC, 300 – 500 μs Pulse) VF1 VF2 VF3 VF4 VF5 VF6 IR1 IR2 CJ Reverse Leakage Current (TA = 25 ºC, 300 μs Minimum Pulse) Reverse Leakage Current (TA = 100 ºC, VR = Rated, 300 μs Minimum Pulse) Junction Capacitance (VR = 0 VDC, VSIG = 50 mVPK, TA = 25ºC, f = 1MHz) Axial Case Outline: DIMENSIONS DIM A B C Note: Lead Diameter is not controlled within 0.050” of the diode body. Square Tab Surface Mount (SMS) Case Outline: MIN. 0.068” 0.150” 1.00” 0.014” MAX. 0.076” 0.170” 1.50” 0.022” D DIMENSIONS DIM A B C D MIN. 0.080” 0.205” 0.22” 0.001” MAX. 0.095 ” 0.220 ” 0.28” --- NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0008E DOC