SPR2KUF

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPR2KUF thru SPR2NUF REVERSE TRANSIENT RATED Designer’s Data Sheet Part Number/Ordering Information 1/ OPTIMIZED FOR USE IN T.W.T. APPLICATIONS SPR2___ __ __ __ 2/ │ │ │ └ Screening │ │ │ __ = Not Screened │ │ │ TX = TX Level │ │ │ TXV = TXV │ │ │ S = S Level │ │ │ │ │ └ Package Type __ = Axial │ │ SMS = Surface Mount Square Tab │ │ │ └ Reverse Recovery │ UF = Ultra Fast Recovery │ └ Device Type ( VRWM ) K = 800V M = 1000V N = 1200V 2 Amp ULTRA FAST RECTIFIER 800-1200 Volts 50 nsec FEATURES: • • • • • • • • • Ultra Fast Reverse Recovery Time: 50 nsec Max PIV to 1200 Volts Reverse Transient Rated: 1 Amp (Typ 1200Wpk Hermetically Sealed For High Efficiency Applications Available in Axial and Surface Mount Versions Metallurgically Bonded Solid Silver Leads for High Thermal Conductivity 2/ TX, TXV, and S-Level Screening Available MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TC = 25°C) SYMBOL SPR2K SPR2M SPR2N VALUE 800 1000 1200 2 25 -65 to +175 38 7.0 UNIT Volts Amps Amps °C °C/W SMS VRRM VRWM VR IO IFSM TOP and TSTG RθJL RθJE Peak Surge Current (8.3ms pulse, half sine wave superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Operating & Storage Temperature Maximum Thermal Resistance Junction to Leads, L=3/8”(Axial) Junction to End Tab (SMS) NOTES: 1/ For Ordering Information, Price, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. Axial Leaded NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0009D DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPR2KUF thru SPR2NUF SYMBOL IF = 0.75A IF = 2A VF IR1 IR2 CJ trr IPK CHARACTERISTICS Instantaneous Forward Voltage Drop (TA = 25°C, 300 μs Pulse) Reverse Leakage Current (VR = rated, 300-500 μs Pulse Minimum , TA = 25°C) Maximum Reverse Leakage Current (VR = 80% rated, 300 μs Pulse Minimum , TA = 125°C) Junction Capacitance (TA = 25°C , f = 1MHz, VR = 10V) Reverse Recovery Time (IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C) Reverse Energy Test (Half sine wave, tp = 600ns @ 50% of IP) MAX 2.1 3.1 5 120 22 50 1 (Minimum) UNIT Vdc μA μA pf nsec A SMS AXIAL D B D ØC ØA C A A D B DIM A B C D MIN NOM MAX MIN .140” .190” .019” .001” MAX .150” .230” .028” --- ------.97” ----.030” --- .140” .180” ----- NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0009D DOC