SPX2094

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPX2094 Series 30 nsec 15,000 VOLTS HIGH VOLTAGE RECTIFIER BRIDGE STACK FEATURES: Designer’s Data Sheet Part Number/Ordering Information 1/ SPX2094__ │ │ │ │ │ │ │ │ │ │ └ __ │ │ │ │ └ __ └ Finish __ = Standard Case SAB = Sand Blasted Case 2/ Screening __ = Not Screened TX = TX Level TXV = TXV S = S Level 3/ Dash Number  Aerospace High Voltage Power Supply Applications  Low Mechanical Stress Design  Excellent Thermal Management- 2.5DC/W  TX, TXV, and Space Level Screening Available Consult Factory For:  Higher Blocking Voltages  Faster Switching Time  Other Electrical Configurations MAXIMUM RATINGS CHARACTERISTIC Peak Repetitive Reverse and DC Blocking Voltage (Module) SYMBOL VR (MODULE) 3/ VR IO IFSM TOP & TSTG θJB VALUE 15,000 2700 1 25 -65 to +150 2.5 ASPM UNIT V Volts Amps Amps °C °C/W Peak Repetitive Reverse and DC Blocking Voltage (Each Bridge) Average Rectified Forward Current (Non-Repetitive, t = 8.3 msec Pulse) Peak Surge Current (Non-Repetitive, t = 8.3 msec Pulse, TA = 25°C) Storage & Operating Temperature Range Thermal Resistance, Junction to Base Notes: 1/ For ordering information, price, and availability- Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ For each dash number, refer to VR(MODULE) rating, schematic, and outline. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0031B DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPX2094 Series ELECTRICAL CHARACTERISTICS, Each Bridge Leg, @ TA = 25°C (Unless Otherwise Specified) PARAMETER Instantaneous Forward Voltage Drop (IF = 1.0A, 300μsec Pulse Minimum) SYMBOL VF1 TA = 25°C TA = 100°C IR1 IR2 RINSUL1 trr MIN ------- MAX 6 10 200 --- UNIT Volts μAmps GΩ nsec Reverse Leakage (VR = 2,500V, 300μsec Pulse Minimum) Insulation Resistance (All Terminals to Base @ 15,000V) Reverse Recovery Time (IF = 0.5A, IR = 1.0A, IRR = 0.25A) 10 -- 30 SPX2094 Schematic SPX2094 Outline Tolerances (Unless Specified): .XX ± .03 .XXX ± .010 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0031B DOC