SSR24C60CT_1

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR24C60CT Series 24 Amp Schottky Silicon Carbide Centertap Rectifier 600 Volts Features:       World's Smallest Hermetic SiC Centertap Rectifier High Voltage, 600V Very High Operating Temperature, 250°C No Recovery Time (tfr or trr) High Current Operation, 24A Hermetically Sealed Packaging  TX, TXV, and S Level screening available DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ SSR24C 60 CT S.5 TX │ │ │ └ Screening 2/ │││ __ = Not Screened │││ TV = TX Level │││ TXV = TXV Level │││ S = S Level │ │ └ Package S.5 = SMD.5 ││ G = Cerpack ││ │ └ Configuration CT = Centertap │ └ Voltage 50 = 500 V 60 = 600 V Maximum Ratings3/ Symbol Value Units Peak Repetitive and Peak Surge Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave) SSR24C50 SSR24C60 Per Leg Total VRRM VRSM Io IFSM PD Top & Tstg 500 600 12 24 50 120 -55 to +250 1.9 Volts Amps Amps Watts °C °C/W Non Repetitive Peak Surge Current (8.3 ms Pulse, Non-repetitive Half Sine Wave, per leg) Power Dissipation (TC = 25°C) Operating & Storage Temperature 4/ Maximum Thermal Resistance Junction to Ambient Junction to Case RθJC Cerpack (G) SMD .5 (S.5) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0020E DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR24C60CT Series Electrical Characteristic (Per Leg) Symbol Min Typ Max Units Instantaneous Forward Voltage Drop (TJ = 25°C, 300 µsec pulse) Instantaneous Forward Voltage Drop (TJ = 150°C, 300 µsec pulse) Instantaneous Forward Voltage Drop (TJ = -55°C, 300 µsec pulse) Reverse Leakage Current (VR = Rated VR, TJ = 25°C, 300 µsec pulse) Reverse Leakage Current (VR = Rated VR, TJ = 150°C, 300 µsec pulse) Junction Capacitance (VR = 10 Vdc, TC = 25°C, f=1MHz) Total Capacitive Charge IF = 6 A IF = 12A IF = 6 A IF = 12A IF = 6 A IF = 12A VF1 V F2 V F3 IR1 I R2 Cj Qc –– –– –– –– –– –– –– 1.30 1.70 1.30 1.70 1.30 1.60 100 400 200 26 1.38 1.90 1.35 1.85 1.40 1.68 200 1000 –– –– Volts Volts Volts µA µA pF nC (VR = 400 Vdc, IF = 5A, di/dt = 200A/µs, TJ = 150°C) NOTES: 1/ 2/ 3/ 4/ For ordering information, price, operating curves, and availability – contact factory. Screening based on MIL-PRF-19500. Screening flows available on request. All Electrical Characteristics @25oC Unless Otherwise Specified. If high temp operation is desired (>175°C) consult factory for soldering consideration. PIN ASSIGNMENT Pin 1 Pin 2 Cathode Anode Anode Anode Available Part Numbers: SSR24C60CTS.5 SSR24C50CTS.5 SSR24C60CTG SSR24C50CTG Package SMD .5 (S.5) Cerpack (G) Pin 3 Anode Cathode NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0020E DOC