SSR30C100S1_1

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR30C100S1 & SSR30C120S1 30 A / 1200 V Schottky Silicon Carbide Rectifier FEATURES: 1200 Volt Silicon Carbide Schottky Rectifier Average Output Current 30 Amps No Reverse Recovery No Forward Recovery No Switching Time Change Over Temperature Small Package Size TX, TXV, and Space Level Screening Available. 2/ Consult Factory. Designer’s Data Sheet Part Number / Ordering Information 1/ SSR30C __ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level TXV = TXV │ │ S = S Level │ │ │ └ Package S1 = SMD1 │ └ Voltage 100 = 1000 V 120 = 1200 V __ __ • • • • • • • MAXIMUM RATINGS 3/ Peak Repetitive and Peak Reverse Voltage Average Rectified Forward Current 4/ (Resistive Load, 60 Hz, Sine Wave) Peak Surge Current 4/ o (8.3 ms Pulse, Half Sine Wave, TA = 25 C) Operating & Storage Temperature Junction Temperature Maximum Thermal Resistance (Junction to Case) 4/ Symbol SSR30C100S1 SSR30C120S1 Total Total VRRM VR IO IFSM T OP & Tstg TJ Total RθJC Value 1000 1200 30 180 -55 to +250 -55 to +250 0.8 Units Volts Amps Amps o o o C C C/W NOTES: 1/ 2/ 3/ 4/ For Ordering Information, Price, and Availability Contact Factory. Screened to MIL-PRF-19500. Unless Otherwise Specified, All Electrical Characteristics @25ºC Terminal Pads 1 & 3 Must be connected together for testing and at the Board Level. SMD1 NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0043C DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR30C100S1 & SSR30C120S1 Symbol IF = 10 A IF = 20 A IF = 30 A IF = 40 A TA= -55ºC, IF = 20 A TA= 150 ºC, IF = 20 A ELECTRICAL CHARACTERISTICS 3/ 4/ Instantaneous Forward Voltage Drop (TA=25ºC, Pulse) Instantaneous Forward Voltage Drop (Pulse) Reverse Leakage Current (Rated VR, TA = 25ºC, Pulse) Min –– –– –– –– –– –– –– –– –– Typ 1.25 1.65 1.8 2.0 1.5 2.6 250 1 1250 Max 1.45 1.75 2.25 --2.0 2.9 1500 5 2000 Units VDC VF1 VF2 VF3 VF4 VF5 VF6 IR1 IR2 CJ VDC μA mA pF Reverse Leakage Current (Rated VR, TA = 150ºC, Pulse) Junction Capacitance o (VR = 10V, f = 1MHz, TA = 25 C) NOTES: * 1/ 2/ 3/ 4/ Pulse Test: Pulse Width = 300 sec, Duty Cycle = 2% For Ordering Information, Price, and Availability Contact Factory. Screened to MIL-PRF-19500. Unless Otherwise Specified, All Electrical Characteristics @25ºC Terminal Pads 1 & 3 Must be connected together for testing and at the Board Level. Available Part Numbers: SSR30C100S1 SSR30C120S1 SMD1 Outline: Package SMD1 PIN ASSIGNMENT Pin 1 Pin 2 Anode Cathode Pin 3 Anode Tolerances (Unless Specified): .XX = ±.030” .XXX = ±.010” NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0043C DOC