SSR3515CTS1

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR3515CTS1 35 Amp CENTER TAP POWER SCHOTTKY RECTIFIER 150 Volts Features: • • • • • Low forward voltage drop resulting in extremely low conduction losses Extremely low switching losses Hermetically Sealed Power Package 2/ TX, TXV, and S-Level Screening Available Enhanced operating temperature range Designer’s Data Sheet Part Number/Ordering Information 1/ SSR3515 __ __ __ │ │ └ Screening 2/ __ = Not Screened ││ TX = TX Level │ ││ TXV = TXV Level S = S Level ││ │ └ Package S1 = SMD1 │ └ Configuration CT = Common Cathode Maximum Ratings Peak Surge Reverse Voltage Peak Repetitive Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) Non-repetitive Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Each leg) Max. Avalanche repetitive reverse current Max. Avalanche non-repetitive reverse current Non-repetitive Avalanche Energy Total Power Dissipation Operating & Storage Temperature Maximum Thermal Resistance, Junction to Case Each Leg Per Package Symbol VRSM VRRM Each leg Package total @ TC = 25°C @ 1.5 x VRRM @ L= 0.18 mH @ TC = 25ºC Value 150 150 20 35 200 0.2 8 7 TBD -55 to+175 2.5 1.25 SMD1 (S1) Units Volts Volts Amps Amps A mJ W °C ºC/W IO ID2 IFSM IAR IAS EAR PD T OP & TSTG R0JC Notes: 1/ For ordering information, price, operating curves, and availability- Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0053A DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR3515CTS1 Symbol IF = 10Adc IF = 15Adc IF = 35Adc IF = 10Adc IF = 15Adc IF = 35Adc IF = 10Adc IF = 15Adc IF = 35Adc VR = 100 V VR = 125 V VR = 150 V VR = 100 V VR = 125 V VR = 150 V VR = 100 V VR = 125 V VR = 150 V VR = 10V VF1 VF2 VF3 VF4 VF5 VF6 VF7 VF8 VF9 IR1 IR2 IR3 IR4 IR5 IR6 IR7 IR8 IR9 CJ Min –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– Typ 0.800 0.870 1.075 0.660 0.740 0.980 0.950 1.020 1.280 5 8 12 1 1.6 2.5 20 23 30 250 Max 0.85 0.95 1.20 0.73 0.85 1.10 1.00 1.12 1.43 –– –– 500 –– –– 20 –– –– –– 350 Units VDC VDC VDC μA mA mA pF Electrical Characteristics, per leg Instantaneous Forward Voltage Drop (Pulsed, TA = 25 ºC) Instantaneous Forward Voltage Drop (Pulsed, TA = 125 ºC) Instantaneous Forward Voltage Drop (Pulsed, TA = -55 ºC) Reverse Leakage Current (Pulsed, TA = 25 ºC) Reverse Leakage Current (Pulsed, TA = 125 ºC) Reverse Leakage Current (Pulsed, TA = 175 ºC) Junction Capacitance (TA = 25ºC, f = 1MHz) Case Outline: SMD1 (S1) Tolerances (Unless Specified): .XX = ±.030” .XXX = ±.010” NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0053A DOC