SZN4495

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SZN4460 thru SZN4496 Series and SZN6485 thru SZN6491 Series 1.5 WATT 3.3 – 200 VOLTS ZENER DIODES AXIAL (__) DESIGNER’S DATA SHEET FEATURES:  Hermetically Sealed in Glass  Rated at 1.5 W  Available in Axial, Round Tab Surface Mount (SM), and  Available to TX, TXV, and Space Levels 7/  Tolerances of 5%, 2%, or 1% Available.  Replaces 1N4460 – 4496 and 1N6485 - 6491 Maximum Ratings Nominal Zener Voltage Maximum Zener Current Forward Surge Current (8.3 msec Pulse) Square Tab Surface Mount (SMS) version Symbol VZ IZM IZSM PD Top Tstg RθJL RθJE Value 3.3 - 200 7.2 - 433 .072 – 4.2 1.5 -65 to +175 -65 to +200 125 83.3 Units V mA A W ºC ºC/W ºC/W DIM A B C D DIM A B C D MIN. .080” .145” 1.00” .028” MAX .107” .181” --.034” Continuous Power Operating and Storage Temp. Thermal Resistance, Junction to Lead, L=3/8” (Axial) SQUARE TAB (SMS) All dimensions are prior to soldering Thermal Resistance, Junction to End Cap (SMS) Part Number/Ordering Information 6/ __ __ __ SZN __ │ │ │ └ Screening 7/ │ │ │ __ = Not Screened │ │ │ TX = TX Level │ │ │ TXV = TXV │ │ │ S = S Level │ │ └ Package Type │ │ __ = Axial Leaded │ │ SMS = Surface Mount Square Tab │ │ SM = Surface Mount Round Tab │ │ Tolerance │ └ __ = 5% │ C = 2% │ D = 1% │ │ └ Voltage/Family 4460 thru 4496: 6.2V thru 200V, See Table on Page 2 6485 thru 6491: 3.3V thru 5.6V, See Table on Page 2 MIN. .125” .195” .023” Body to Tab Clearance: .003” MAX. .135” .260” .027” --- ROUND TAB (SM) All dimensions are prior to soldering DIM A B C D MIN. .084” .189” .010” Body to Tab Clearance: .001” MAX. .102” .205” .022” --- NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: Z00008G DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SZN4460 thru SZN4496 Series And SZN6485 thru SZN6491 Series Maximum Zener Impedance (note 2) ZZ @ IZT Ohms 10 10 9 9 8 7 5 4 2.5 2.5 3 4 5 6 7 8 9 10 11 12 14 16 18 20 25 27 30 40 50 60 70 80 100 130 160 200 250 300 400 500 700 1000 1300 1500 Electrical Characteristics @ 25°C PART NUMBER Nominal Zener Voltage (note 1) VZ @ IZT VOLT SZN6485 SZN6486 SZN6487 SZN6488 SZN6489 SZN6490 SZN6491 SZN4460 SZN4461 SZN4462 SZN4463 SZN4464 SZN4465 SZN4466 SZN4467 SZN4468 SZN4469 SZN4470 SZN4471 SZN4472 SZN4473 SZN4474 SZN4475 SZN4476 SZN4477 SZN4478 SZN4479 SZN4480 SZN4481 SZN4482 SZN4483 SZN4484 SZN4485 SZN4486 SZN4487 SZN4488 SZN4489 SZN4490 SZN4491 SZN4492 SZN4493 SZN4494 SZN4495 SZN4496 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10.0 11.0 12.0 13.0 15.0 16.0 18.0 20.0 22.0 24.0 27.0 30.0 33.0 36.0 39.0 43.0 47.0 51.0 56.0 62.0 68.0 75.0 82.0 91.0 100.0 110.0 120.0 130.0 150.0 160.0 180.0 200.0 Zener Test Current IZT mA 76 69 64 58 53 49 45 40.0 37.0 34.0 31.0 28.0 25.0 23.0 21.0 19.0 17.0 15.5 14.0 12.5 11.5 10.5 9.5 8.5 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.7 3.3 3.0 2.8 2.5 2.0 2.0 1.9 1.7 1.6 1.4 1.2 Maximum Knee Impedance ZZK @ IZK Ohms 400 400 400 400 500 500 600 200 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 800 850 900 950 1000 1100 1300 1500 1700 2000 2500 3000 3100 4000 4500 5000 6000 6500 7000 8000 Maximum Reverse Leakage Current Maximum Continuous Current (note 3) IZM mA 433 397 366 332 304 280 255 230 210 191 174 157 143 130 119 110 95 90 79 71 65 60 53 48 43 40 37 33 30 28 26 23 21 19 17 16 14 13 12 11 9.5 8.9 7.9 7.2 Maximum Surge Current (note 4) IZSM Amps 4.2 3.9 3.6 3.3 3.0 2.7 2.5 2.3 2.1 1.9 1.7 1.6 1.4 1.3 1.2 1.1 .95 .90 .79 .71 .65 .60 .53 .48 .43 .40 .37 .33 .30 .28 .26 .23 .21 .19 .17 .16 .14 .13 .12 .11 .095 .089 .079 .072 IR @ VR µA 50 50 35 5.0 4.0 1.0 0.5 10.0 5.0 1.0 .50 .30 .30 .30 .20 .05 .05 .05 .05 .05 .05 .05 .05 .05 .05 .05 .05 .05 .05 .05 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 25 .25 VR (note 8) Volts 1.0 1.0 1.0 1.0 1.0 1.0 2.0 3.72 4.08 4.50 4.92 5.46 8.00 8.80 9.60 10.40 12.00 12.80 14.40 16.00 17.60 19.20 21.60 24.00 26.40 28.80 31.2 34.4 37.6 40.8 44.8 49.6 54.4 60.4 65.6 72.8 80.8 88.0 96.0 104.0 120.0 128.0 144.0 160.0 mA 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 .5 .5 .5 .25 .25 .25 .25 .25 25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 .25 NOTES: 1/ All zener voltages are measured with an automated test set using a 35 msec test time. Longer or shorter test time will have a corresponding effect on the measured value due to heating effects. 2/ Zener impedance is derived from the AC voltage divided by the AC current with RMS value of 10% of DC zener test current superimposed on the test current. 3/ Ratings based on maximum zener voltage of individual units (leaded units). 4/ Figures shown are for a peak sinusoidal surge current of 8.3 msec duration, non-repetitive. The 8.3 msec square pulse rating is 71% of the value shown. 5/ SSDI standard marking consists of a contrasting color cathode dot or band. Part number information is included on packaging labels. 6/ For Ordering Information, Price, and Availability- Contact Factory. 7/ Screening based on MIL-PRF-19500. Screening flows available on request. 8/ Voltages are shown for 5% tolerance devices. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: Z00008G DOC