1N4937G

SHANGHAI SUNRISE ELECTRONICS CO., LTD. 1N4933G THRU 1N4937G GLASS PASSIVATED FAST RECOVERY RECTIFIER VOLTAGE: 50 TO 600V CURRENT: 1.0A FEATURES • Molded case feature for auto insertion • Glass passivated chip • Fast switching for high efficiency • High current capability • Low leakage current • High surge capability • High temperature soldering guaranteed: 250oC/10sec/0.375"(9.5mm) lead length at 5 lbs tension TECHNICAL SPECIFICATION DO - 41 MECHANICAL DATA • Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode • Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (9.5mm lead length, at Ta=75oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Forward Voltage (at rated forward current and 25oC) Maximum DC Reverse Current Ta=25oC (at rated DC blocking voltage) Ta=100 C o SYMBOL VRRM VRMS VDC IF(AV) IFSM VF IR 1N 1N 1N 1N 1N UNITS 4933G 4934G 4935G 4936G 4937G 50 100 200 400 600 V 35 70 140 280 420 V 50 100 200 400 600 V 1.0 30.0 1.2 5.0 100 200 15.0 50.0 -65 to +150 A A V µA µA nS pF o Maximum Reverse Recovery Time (Note 1) trr CJ Typical Junction Capacitance (Note 2) Rθ(ja) Typical Thermal Resistance (Note 3) TSTG,TJ Storage and Operation Junction Temperature Note: 1.Reverse recovery condition IF=1.0A, VR=30V 2.Measured at 1.0 MHz and applied voltage of 4.0Vdc 3.Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C. board mounted C/W o C http://www.sse-diode.com