ES1A

SHANGHAI SUNRISE ELECTRONICS CO., LTD. ES1A THRU ES1G SURFACE MOUNT SUPER FAST SWITCHING RECTIFIER VOLTAGE: 50 TO 400V CURRENT: 1.0A FEATURES • Ideal for surface mount pick and place application • Low profile package • Built-in strain relief • High surge capability • Glass passivated chip • Super fast recovery for high efficiency • High temperature soldering guaranteed: 260oC/10sec/at terminal TECHNICAL SPECIFICATION SMA/DO-214AC B A C D F G A MAX. .110(2.79) MIN. .100(2.54) E MAX. .208(5.28) MIN. .194(4.93) B .177(4.50) .157(3.99) F .090(2.29) .078(1.98) H C D .058(1.47) .012(0.305) .052(1.32) .006(0.152) G H .008(0.203) .060(1.52) .004(0.102) .030(0.76) MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL ES1A ES1B ES1C ES1D ES1E ES1G UNITS 300 210 300 400 280 400 V V V A A 1.25 V µA µA nS pF o VRRM Maximum Repetitive Peak Reverse Voltage 50 100 150 200 VRMS Maximum RMS Voltage 35 70 105 140 VDC Maximum DC Blocking Voltage 50 100 150 200 Maximum Average Forward Rectified Current IF(AV) 1.0 (TL=110oC) Peak Forward Surge Current (8.3ms single IFSM 30 half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage VF 0.95 (at rated forward current) 5.0 Maximum DC Reverse Current Ta=25oC IR o 200 (at rated DC blocking voltage) Ta=100 C 35 Maximum Reverse Recovery Time (Note 1) trr 10 CJ Typical Junction Capacitance (Note 2) 40 Typical Thermal Resistance (Note 3) Rθ(ja) -50 to +150 Storage and Operation Junction Temperature TSTG,TJ Note: 1.Reverse recovery condition IF=0.5A, IR=1.0A,Irr=0.25A. 2.Measured at 1.0 MHz and applied voltage of 4.0Vdc 3.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area C/W o C http://www.sse-diode.com