FR155G

SHANGHAI SUNRISE ELECTRONICS CO., LTD. FR151G THRU FR157G GLASS PASSIVATED FAST RECOVERY RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 1.5A FEATURES • Molded case feature for auto insertion • Glass passivated chip • High current capability • Low leakage current • Fast switching for high efficiency • High surge capability • High temperature soldering guaranteed: 250oC/10sec/0.375"(9.5mm) lead length at 5 lbs tension TECHNICAL SPECIFICATION DO - 15 MECHANICAL DATA • Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode • Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (9.5mm lead length, at Ta=55oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at rated forward current ) Maximum DC Reverse Current Ta=25oC (at rated DC blocking voltage) Ta=100 C o SYMBOL VRRM VRMS VDC IF(AV) IFSM VF IR FR FR FR 151G 152G 153G 50 100 200 35 70 140 50 100 200 FR 154G 400 280 400 1.5 60.0 1.3 5.0 100 FR 155G 600 420 600 FR 156G 800 560 800 FR UNITS 157G 1000 V 700 V 1000 V A A V µA µA nS pF o 150 500 trr 250 Maximum Reverse Recovery Time (Note 1) 20 CJ Typical Junction Capacitance (Note 2) 40 Typical Thermal Resistance (Note 3) Rθ(ja) -65 to +150 Storage and Operation Junction Temperature TSTG,TJ Note: 1.Reverse recovery condition IF=0.5A, IR=1.0A, Irr=0.25A 2.Measured at 1.0 MHz and applied voltage of 4.0Vdc 3.Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C. board mounted C/W o C http://www.sse-diode.com