FR307G

SHANGHAI SUNRISE ELECTRONICS CO., LTD. FR301G THRU FR307G GLASS PASSIVATED FAST RECOVERY RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 3.0A FEATURES • Molded case feature for auto insertion • Glass passivated chip • High current capability • Low leakage current • Fast switching for high efficiency • High surge capability • High temperature soldering guaranteed: 250oC/10sec/0.375"(9.5mm) lead length at 5 lbs tension TECHNICAL SPECIFICATION DO - 201AD MECHANICAL DATA • Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode • Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL VRRM Maximum Repetitive Peak Reverse Voltage VRMS Maximum RMS Voltage VDC Maximum DC Blocking Voltage Maximum Average Forward Rectified Current IF(AV) 3.0 (9.5mm lead length, at Ta=55oC) Peak Forward Surge Current (8.3ms single IFSM 125 half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage VF 1.3 (at rated forward current ) 5.0 Maximum DC Reverse Current Ta=25oC IR o 100 (at rated DC blocking voltage) Ta=100 C 150 500 Maximum Reverse Recovery Ti (Note 1) trr 250 40 CJ Typical Junction Capacitance (Note 2) 30 Typical Thermal Resistance (Note 3) Rθ(ja) -65 to +150 TSTG,TJ Storage and Operation Junction Temperature Note: 1.Reverse recovery condition IF=0.5A, IR=1.0A, Irr=0.25A 2.Measured at 1.0 MHz and applied voltage of 4.0Vdc 3.Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C. board mounted FR FR FR FR FR FR FR UNITS 301G 302G 303G 304G 305G 306G 307G 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 600 800 1000 V A A V µA µA nS pF o C/W o C http://www.sse-diode.com