RS1J

SHANGHAI SUNRISE ELECTRONICS CO., LTD. RS1A THRU RS1M SURFACE MOUNT FAST SWITCHING RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 1.0A FEATURES • Ideal for surface mount pick and place application • Low profile package • Built-in strain relief • High surge capability • Glass passivated chip • Fast recovery for high efficiency • High temperature soldering guaranteed: 260oC/10sec/at terminal TECHNICAL SPECIFICATION SMA/DO-214AC B A C D F G A MAX. .110(2.79) MIN. .100(2.54) E MAX. .208(5.28) MIN. .194(4.93) B .177(4.50) .157(3.99) F .090(2.29) .078(1.98) H C D .058(1.47) .012(0.305) .052(1.32) .006(0.152) G H .008(0.203) .060(1.52) .004(0.102) .030(0.76) MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode Dimensions in inches and (millimeters) o MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25 C, unless otherwise stated,for capacitive load, derate current by 20%) RATINGS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (TL=110oC) Peak Forward Surge Current (8.3ms single SYMBOL VRRM VRMS VDC IF(AV) IFSM VF IR RS 1A 50 35 50 RS 1B 100 70 100 RS 1D 200 140 200 RS 1G 400 280 400 1.0 30 1.3 5.0 200 RS 1J 600 420 600 RS RS UNITS 1K 1M 800 1000 V 560 700 V 800 1000 V A A V µA µA nS pF o o half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at rated forward current) Maximum DC Reverse Current Ta=25oC (at rated DC blocking voltage) Maximum Reverse Recovery Time Typical Junction Capacitance Typical Thermal Resistance o Ta=125 C 150 (Note 1) trr 250 15 CJ (Note 2) 30 (Note 3) Rθ(ja) -50 to +150 TSTG,TJ Storage and Operation Junction Temperature Note: 1.Reverse recovery condition IF=0.5A, IR=1.0A,Irr=0.25A. 2.Measured at 1.0 MHz and applied voltage of 4.0Vdc 3.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area 500 C/W C http://www.sse-diode.com