RS2DA

SHANGHAI SUNRISE ELECTRONICS CO., LTD. RS2AA THRU RS2MA SURFACE MOUNT FAST SWITCHING RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 2.0A FEATURES • Ideal for surface mount pick and place application • Low profile package • Built-in strain relief • High surge capability • Glass passivated chip • Fast recovery for high efficiency • High temperature soldering guaranteed: 260oC/10sec/at terminal TECHNICAL SPECIFICATION SMA/DO-214AC B A C D F G A MAX. .110(2.79) MIN. .100(2.54) E MAX. .208(5.28) MIN. .194(4.93) B .177(4.50) .157(3.99) F .090(2.29) .078(1.98) H C D .058(1.47) .012(0.305) .052(1.32) .006(0.152) G H .008(0.203) .060(1.52) .004(0.102) .030(0.76) MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (TL=110oC) SYMBOL VRRM VRMS VDC IF(AV) RS2 RS2 RS2 RS2 RS2 RS2 RS2 UNITS AA BA DA GA JA KA MA 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 600 800 1000 V 2.0 A A V µA µA 500 o Peak Forward Surge Current (8.3ms single IFSM 50 half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage VF 1.3 (at rated forward current) 5.0 Maximum DC Reverse Current Ta=25oC IR o 200 (at rated DC blocking voltage) Ta=125 C 150 Maximum Reverse Recovery Time (Note 1) trr 250 30 CJ Typical Junction Capacitance (Note 2) 16 Typical Thermal Resistance (Note 3) Rθ(ja) -50 to +150 TSTG,TJ Storage and Operation Junction Temperature Note: 1.Reverse recovery condition IF=0.5A, IR=1.0A,Irr=0.25A. 2.Measured at 1.0 MHz and applied voltage of 4.0Vdc 3.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area nS pF C/W o C http://www.sse-diode.com