S1K

SHANGHAI SUNRISE ELECTRONICS CO., LTD. S1A THRU S1M SURFACE MOUNT GLASS PASSIVATED RECTIFIER VOLTAGE: 50 TO 1000VCURRENT: 1.0A FEATURES • Ideal for surface mount pick and place application • Low profile package • Built-in strain relief • High surge capability • High temperature soldering guaranteed: 260oC/10sec/at terminal TECHNICAL SPECIFICATION SMA/DO-214AC B A C D F G A MAX. .110(2.79) MIN. .100(2.54) E MAX. .208(5.28) MIN. .194(4.93) B .177(4.50) .157(3.99) F .090(2.29) .078(1.98) MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode H C D .058(1.47) .012(0.305) .052(1.32) .006(0.152) G H .008(0.203) .060(1.52) .004(0.102) .030(0.76) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (TL=100oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at rated forward current) Maximum DC Reverse Current (at rated DC blocking voltage) Typical Junction Capacitance Typical Thermal Resistance Ta=25oC Ta=125 C (Note 1) (Note 2) o SYMBOL S1A S1B S1D S1G VRRM VRMS VDC IF(AV) IFSM VF IR CJ Rθ(ja) TSTG,TJ 50 35 50 100 70 100 200 140 200 400 280 400 1.0 30 1.1 5.0 200 15 30 S1J 600 420 600 S1K S1M UNITS 800 560 800 1000 700 1000 V V V A A V µA µA pF o C/W o Storage and Operation Junction Temperature Note: 1.Measured at 1.0 MHz and applied voltage of 4.0Vdc 2.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area -65 to +150 C http://www.sse-diode.com