SF1D

SHANGHAI SUNRISE ELECTRONICS CO., LTD. SF1A THRU SF1G SURFACE MOUNT SUPER FAST SWITCHING RECTIFIER VOLTAGE: 50 TO 400V CURRENT: 1.0A FEATURS • Ideal for surface mount pick and place application • Low profile package • Built-in strain relief • High surge capability • Open junction chip,silastic passivated • Super fast recovery for high efficiency • High temperature soldering guaranteed: 260oC/10sec/at terminal TECHNICAL SPECIFICATION DSMA/DO-214AC B A I D F G H C MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode A B D C .177(4.50) .075(1.90) .012(0.305) MAX. .110(2.79) .157(3.99) .052(1.32) .006(0.152) MIN. .100(2.54) E F G H I MAX. .208(5.28) .090(2.29) .008(0.203) .060(1.52) .035(0.88) MIN. .194(4.93) .078(1.98) .004(0.102) .030(0.76) .027(0.68) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL SF1A SF1B SF1C SF1D SF1E SF1G UNITS 300 210 300 400 280 400 V V V A A 1.25 V µA µA nS pF o VRRM Maximum Repetitive Peak Reverse Voltage 50 100 150 200 VRMS Maximum RMS Voltage 35 70 105 140 VDC Maximum DC Blocking Voltage 50 100 150 200 Maximum Average Forward Rectified Current IF(AV) 1.0 (TL=110oC) Peak Forward Surge Current (8.3ms single IFSM 30 half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage VF 0.95 (at rated forward current) 5.0 Maximum DC Reverse Current Ta=25oC IR o 200 (at rated DC blocking voltage) Ta=100 C 35 Maximum Reverse Recovery Time (Note 1) trr 10 CJ Typical Junction Capacitance (Note 2) 40 Typical Thermal RSFistance (Note 3) Rθ(ja) -50 to +150 Storage and Operation Junction Temperature TSTG,TJ Note: 1.Reverse recovery condition IF=0.5A, IR=1.0A,Irr=0.25A. 2.Measured at 1.0 MHz and applied voltage of 4.0Vdc 3.Thermal rSFistance from junction to terminal mounted on 5×5mm copper pad area C/W o C http://www.sse-diode.com