SS12

SHANGHAI SUNRISE ELECTRONICS CO., LTD. SS12 THRU SS16 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE: 20 TO 60V CURRENT: 1.0A FEATURES • Ideal for surface mount pick and place application • Low profile package • Low power loss, high efficiency • High current capability,low VF • High surge capability • High temperature soldering guaranteed: 260oC/10sec/at terminal TECHNICAL SPECIFICATION SMA/DO-214AC B A C D F G H C D .058(1.47) .012(0.305) .052(1.32) .006(0.152) G H .008(0.203) .060(1.52) .004(0.102) .030(0.76) MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode A MAX. .110(2.79) MIN. .100(2.54) E MAX. .208(5.28) MIN. .194(4.93) B .177(4.50) .157(3.99) F .090(2.29) .078(1.98) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current SYMBOL VRRM VRMS VDC SS12 20 14 20 SS13 30 21 30 SS14 40 28 40 SS15 50 35 50 SS16 60 42 60 UNITS V V V A A IF(AV) 1.0 (TL=110oC) Peak Forward Surge Current (8.3ms single IFSM 30 half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage VF 0.5 (at rated forward current) 0.5 Maximum DC Reverse Current Ta=25oC IR o 10.0 (at rated DC blocking voltage) Ta=100 C 110 CJ Typical Junction Capacitance (Note 1) 20 Rθ(ja) Typical Thermal Resistance (Note 2) -65 to +150 TSTG,TJ Storage and Operation Junction Temperature Note: 1.Measured at 1.0 MHz and applied voltage of 4.0Vdc 2.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area 0.7 V mA mA pF o C/W o C http://www.sse-diode.com